Abstract:The duty-cycle randomness (DCR) of the Bragg grating of the distributed feedback (DFB) lasers introduced by the fabrication process is inevitable, even with state-of-the-art technologies such as electron beam lithography and dry or wet etching.This work investigates the impact of grating DCR on DFB laser performance through numerical simulations. The result reveals that such randomness causes a reduction in the side mode suppression ratio (SMSR), and deteriorates the noise characteristics, i.e., broadens the linewidth and increases the relative intensity noise (RIN). With the grating DCR, the effective grating coupling coefficient decreases as evidenced by the reduced Bragg stopband width. However, the longitudinal spatial hole burning (LSHB) effect in the DFB lasers can somewhat be diminished by the grating DCR. The seriousness of these effects depends on different grating structures and their coupling strengths. Our simulation shows that a degradation of 17 dB can be brought to the SMSR of the uniform grating DFB lasers with their duty cycles taking a deviation of ±25% in a uniformly distributed random fashion. It also broadens the linewidth of the quarter-wavelength phase-shifted DFB lasers by more than 2.5 folds. The impact of this effect on the RIN is moderate—less than 2%. All the performance deteriorations can partially be attributed to the effective reduction in the grating coupling coefficient of around 20% by such a DCR.

The relative intensity noise and relaxation oscillation characteristics of a distributed-feedback fiber laser

Study of an Unsaturated PbSe QD-Doped Fiber Laser by Numerical Simulation and Experiment

Relative Intensity Noise Comparison of Fiber Laser and Amplified Spontaneous Emission Sources

Numerical Analysis of Relative Intensity Noise of Distributed-Feedback Fiber Lasers Considering Spatial Mode Profile

Frequency noise of distributed Bragg reflector single-frequency fiber laser

Characterization and regulation of statistical properties in Er-doped random fiber laser

Relative Intensity Noise Measurement Of A Fiber Laser

Frequency Noise Characteristics of A Narrow-Linewidth Dfb Semiconductor Laser in Resonator Fiber Optic Gyro

Optical and RIN Spectrum Improvements in Necked Waveguide High-Power DFB Laser Diode

Suppression of Relative Intensity Noise in Mutually Injection Locked Dfb Laser Diodes

Numerical simulation and observed rotational relaxation in CW and pulsed HBr-filled hollow-core fiber lasers

Effect of linewidth on intensity noise induced by stimulated Brillouin scattering in single-mode fibers

Timing Jitter Reduction Through Relative Intensity Noise Suppression in High-Repetition-rate Mode-Locked Fiber Lasers

Bound dissipative-pulse evolution in the all-normal dispersion fiber laser using a 45° tilted fiber grating

Ultra-Low Noise Figure in Optical Fiber Amplifier by Tailoring the Mode Field Profile of Erbium-Doped Fiber

Sub-kHz high-order mode Brillouin random fiber laser based on long-period fiber grating and distributed Rayleigh scattering in a half-open linear cavity

Analysis of multiple wavelength DFB fiber lasers

Noise Suppression of Relaxation Oscillation Intensity in a Microcavity Raman Laser

Theoretical and experimental investigation on the gain filtering effect in the high-power fiber oscillator using confined-doped fiber

Impact of Grating Duty-Cycle Randomness on DFB Laser Performance

Modeling the 3-micron Class Er-Doped Fluoride Fiber Laser with a Cubic Energy Transfer Rate Dependence