Abstract:This paper is focused on a dual-loop current control method (grid current loop and fundamental current loop) for digitally controlled LCL-type shunt active power filters (APFs). Normally, a proportional-resonant (PR) unit is used as the fundamental current controller, where the proportional part of PR unit actually serves as the proportional feedback of inverter-side current and provides a certain degree of damping for LCL resonance. However, its valid damping region is only up to one-sixth of the sampling frequency (fs/6), which leads to less robustness to the grid impedance. To address this issue, a delay-compensation control link is proposed in this paper to replace the proportional part of the PR fundamental current controller and widen the effective damping region. As a result, the system robustness is improved without adding extra sensors or introducing an extra active damping loop. Theoretical analysis proves that it can obtain a wider damping region of (0, fs/4). Moreover, a systematic controller parameter design criterion is studied. In particular, a numerical optimization algorithm is developed to optimize damping property, and a design method based on root locus plot and Bode diagram is presented to enhance harmonic compensation accuracy. Finally, experimental results implemented on a 30 kVA APF prototype have validated the feasibility of the proposed current controller and parameter design criterion.

Application Of High-Sampling-Frequency Control In Low-Switching-Frequency Lcl-Filtered System

Weighted Average Current Control in a Three-Phase Grid Inverter with an LCL Filter

A Systematic Approach Via IIR Filters for Enhancing the Robustness of LCL-Type Shunt Active Power Filters to Grid Impedance

Robust Current Control Method for LCL-Type Shunt Active Power Filters with Inverter-Side Current Feedback Active Damping

Research on Splitting Capacitor and Repetitive Control for Grid-connected Inverter With LCL Filter

Design of Digital Filter-based Highly Robust Active Damping for LCL-filtered Grid-tied Inverters

A Robust Dual-Loop Current Control Method with a Delay-Compensation Control Link for LCL-Type Shunt Active Power Filters

Current Control of LCL-Type Shunt APFs: Damping Characteristics, Stability Analysis, and Robust Design Against Grid Impedance Variation

A Current Control Method for LCL Active Power Filters Based on the Reduced Order Generalized Integrator

A Low Delay Anti-Aliasing Method of Multisampling for Grid-tied Inverter with LCL Filter

Aliasing Suppression with Negligible Phase Lag for Multi-Sampled LCL-Type Grid-Tied Inverter

A stability control strategy for PWM converter with undamped LCL-filter

Digital Low-Pass-Filter-Based Single-Loop Damping For Lcl-Filtered Grid-Tied Inverters

A Novel Control Approach for LCL-based Shunt Active Power Filter with High Dynamic and Steady-State Performance

Robust Active Damping Control for LCL-Type Shunt Active Power Filters

An Enhanced Active Damping Control Method for <i>LCL</i>-Type Shunt APFs with Proportional-Resonant-Differential Inverter-Side Current Feedback

Current Loop Control Approach for LCL-based Shunt Active Power Filter

Single Current Feedback Control Strategy for Grid-connected Inverters with LCL Filters

Dissipativity Enhancement for Multisampled LCL-Type Inverter Using a Low-Delay Ripple-Removal Method

A Single-loop Current Control Method for LCL-filtered Grid-connected Inverters Based on the Repetitive Controller

Control strategies for the grid-connected inverter with LCL filter