Abstract:In present study, the nanoscale assignment behavior of strain and stress state at the interface of T-2-Al6CuLi3/alpha-Al matrix is investigated by Transmission Electron Microscope (TEM) combined with Geometric phase analysis (GPA) method. The obtained results reveal the toughening effect of the icosahedral quasicrystalline phase T-2-Al6CuLi3 on cast Al-Li alloys. It is found that the precipitation of T-2-Al6CuLi3 phase consumes Li atoms in competition with delta'-Al3Li phase during the aging process, which damages yield stress (YS) and Young's modulus of alloy. Compared with Base alloy, the yield stress and Young's modulus of the Quasicrystalline alloy decrease 2.39% and 22.26%, respectively. A flat and smooth interface morphology of T-2-Al6CuLi3/alpha-Al matrix is observed in high-resolution images. Furthermore, the distribution state of the nanoscale strain shows that the matrix with higher ductility suffered most strain when the sample is subjected to the applied load. Meanwhile, the quasicrystalline phase T-2 compresses during the precipitation process, which suppresses the crack initiation and propagation along the interface of the T-2-Al6CuLi3/alpha-Al matrix. The assignment behavior of strain contributes to the enhancement of ductility and toughness of the alloy, partially alleviating the intergranular brittle fracture tendency which is common in Al-Li alloys. It is observed that the existence of quasicrystalline phases improves the elongation (EL) and product of strength and ductility (PSD) by 62.5% and more than five times without the loss of the ultimate tensile stress (UTS). Therefore, the present study provides a promising reference for the design of the quasicrystal-reinforced cast Al-Li alloys. (C) 2021 Elsevier B.V. All rights reserved.

Strained Coherent Interface Energy of the Guinier–Preston II Phase in Al–Cu During Stress Aging

Energetics response to precipitates interface Al/θ' under strain aging

Atomic-scale study on the precipitation behavior of an Al-Zn-Mg-Cu alloy during isochronal aging

Effects of External Stress Aging on Morphology and Precipitation Behavior of Θ″ Phase in Al-Cu Alloy

Stress/strain Aging Mechanisms in Al Alloys from First Principles

The growth mechanisms of θ′ precipitate phase in an Al-Cu alloy during aging treatment

Computer simulation of interface evolution for an Al-Li alloy during early aging stage

The Nanoscale Strain Assignment Behavior of Icosahedral Quasicrystalline Phase T2-Al6CuLi3 in Cast Al-Li Alloys

First-principles Investigation of the Structural, Mechanical and Thermodynamic Properties of Al2Cu Phase under Various Pressure and Temperature Conditions

Effect of Interface Type on Deformation Mechanisms of Γ-Tial Alloy under Different Temperatures and Strain Rates by Molecular Dynamics Simulation

Stress-induced Thickening of Ω Phase in Al–Cu–Mg Alloys Containing Various Ag Additions

Ageing evolution process of the θ ′ -phase in Al-Si-Cu-Mg alloys: Atomic-scale observations and first-principles calculations

Effect of external stress on the growth of precipitates in Al-Cu and Al-Cu-Mg-Ag alloys

Formation of a New Intermediate Phase and Its Evolution Toward Θ' During Aging of Pre-Deformed Al-Cu Alloys

Inclined θ′ precipitates with terraced Cu/Mn-rich multilayers in Al–Cu alloys

A First-Principles Study of the Structural, Mechanical and Electronic Properties of Precipitates of Al2Cu in Al-Cu Alloys.

Quantitative study of the effect of stress on the precipitation in an Al-Cu-Mg-Ag alloy single crystal

Mechanism of Stress Aging in Al-Cu（-Mg-Ag） Alloys

Heterophase Interface Dominated Deformation and Mechanical Properties in Al‐Cu‐Li Alloys

Pre-Aging Effect on the Formation of Ω Phase and Mechanical Properties of the Al-Cu-Mg-Ag Alloy

Microscopic Phase-Field Study On Solute Segregation And Drag Of Interfaces During Stress Aging In Ni75al7.5v17.5 Alloys