Abstract:Reactive melt infiltration (RMI) has been proved to be one of the most promising technologies for fabrication of C/SiC composites because of its low cost and short processing cycle. However, the poor mechanical and anti-ablation properties of the RMI-C/SiC composites severely limit their practical use due to an imperfect siliconization of carbon matrixes with thick walls and micron-sized pores. Here, we report a high-performance RMI-C/SiC composite fabricated using a carbon fiber reinforced nanoporous carbon (NC) matrix preform composed of overlapping nanoparticles and abundant nanopores. For comparison, the C/C performs with conventional pyrocarbon (PyC) or resin carbon (ReC) matrixes were also used to explore the effect of carbon matrix on the composition and property of the obtained C/SiC composites. The C/SiC derived from C/NC with a high density of 2.50 g cm -3 has dense and pure SiC matrix and intact carbon fibers due to the complete ceramization of original carbon matrix and the almost full consumption of inspersed silicon. In contrast, the counterparts based on C/PyC or C/ReC with a low density have a little SiC, much residual silicon and carbon, and many corroded fibers. As a result, the C/SiC from C/NC shows the highest flexural strength of 218.1 MPa and the lowest ablation rate of 0.168 μm s -1 in an oxyacetylene flame of ~ 2200 °C with a duration time of 500 s. This work opens up a new way for the development of high-performance ceramic matrix composites by siliconizing the C/C preforms with nanoporous carbon matrix

Facile fabrication of three-dimensional mesoporous Si/SiC composites via one-step magnesiothermic reduction at relative low temperature

In Situ Synthesis of Carbon Doped Porous Silicon Nanocomposites As High-Performance Anodes for Lithium-Ion Batteries.

Low Temperature Synthesis of Mesoporous Silicon Carbide Via Magnesiothermic Reduction

Low-temperature pseudomorphic transformation of ordered hierarchical macro-mesoporous SiO2/C nanocomposite to SiC via magnesiothermic reduction.

Synthesis and properties of porous SiN/SiC nanocomposites by carbothermal reaction between SiN and carbon

Fabrication of C/SiC composites by siliconizing carbon fiber reinforced nanoporous carbon matrix preforms and their properties

Low Temperature Chemical Reduction of Fusional Sodium Metasilicate Nonahydrate into a Honeycomb Porous Silicon Nanostructure

Preparation of Mesoporous Si Nanoparticles by Magnesiothermic Reduction for the Enhanced Reactivity

Short SiC Fiber Reinforced SiC-BN Ceramic Matrix Composites

Facile Synthesis of Transparent Mesostructured Composites and Corresponding Crack-Free Mesoporous Carbon/Silica Monoliths

Synthesis and characterization of hollow Si–SiC composite nanospheres from hollow SiO 2 /C nanospheres

Fabrication of 2H/3C-SiC heterophase junction nanocages for enhancing photocatalytic CO2 reduction

Study of Rapid Fabrication and Microstructure of C/C-SiC Composites

Fabrication, Microstructure, and Properties of SiC/Al 4 SiC 4 Multiphase Ceramics Via an In-Situ Formed Liquid Phase Sintering

Rapid Fabrication of C/C-Sic Composites

A Low Cost Preparation of C/SiC Composites by Infiltrating Molten Si into Gelcasted Pure Porous Carbon Preform

Fabrication, microstructure, and properties of SiC/Al4SiC4 multiphase ceramics via an in-situ formed liquid phase sintering

Facile Synthesis of Ordered Magnetic Mesoporous Gamma-Fe2o3/Sio2 Nanocomposites with Diverse Mesostructures

Preparation method of C/C-SiC-MoSi2 ceramic-based composite material

SiC–Si3N4 composite with multi-laminate nanowires originated from oriented porous structure by freeze-casting

Preparation And Properties Of Sintering-Free Low Density Si3n4/Sic Composite Refractory