Abstract:Ni-rich cathode material is one of the most promising materials for Li-ion batteries in electric vehicles. However, fading capacity, poor cyclic stability and high pH value are still major challenges, which suppress its practical application. In this study, spherical LiNi0.9Co0.08Al0.02O2 powders with 0.4 wt% TiO2 coating layer were prepared by impregnation–hydrolysis method. Scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD) results show that TiO2 is uniformly coated on the surface of LiNi0.9Co0.08Al0.02O2 particle and slightly embedded into LiNi0.9Co0.08Al0.02O2 particles. After 100 cycles at 2.0C, 0.4 wt% TiO2-coated LiNi0.9Co0.08Al0.02O2 electrode delivers much higher discharge capacity retention (77.0%) than the pristine LiNi0.9Co0.08Al0.02O2 electrode (63.3%). The excellent cycling performance of 0.4 wt% TiO2-coated LiNi0.9Co0.08Al0.02O2 electrode at a high discharge ratio is due to a TiO2 coating layer which can effectively reduce the direct contact between cathode material and electrolyte, suppress the oxidation of electrolyte, improve electrical conductivity of the electrode and increase the stability of the structure.<h3 class="a-plus-plus">Graphic abstract</h3> With the increase of current density, TCNC sample clearly exhibits enhanced cycling performance with higher capacity retention, and the capacity retention of TCNC increases by 22% at 2.0 C.

Nitrogen-doped carbon coated anatase TiO2 anode material for lithium-ion batteries

Nitrogen-doped Carbon Coated TiO2 Nanocomposites As Anode Material to Improve Cycle Life for Lithium-Ion Batteries

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Nitrogen-doped/carbon-coated 2D TiO2 Scaly clusters as high-performance anode for Lithium-ion batteries

Surface nitrided and carbon coated TiNb2O7 anode material with excellent performance for lithium-ion batteries

Structural Analysis and Electrochemical Studies of Carbon Coated Li4ti5o12 Particles Used As Anode for Lithium Ion Battery

Ultrathin N‐doped Carbon‐coated TiO2 Coaxial Nanofibers As Anodes for Lithium Ion Batteries

High Rate Capability of TiO2/nitrogen-doped Graphene Nanocomposite As an Anode Material for Lithium–ion Batteries

TiO 2 embedded in ultrathin N-doping carbon nanosheets derived from shape-engineered titanium metal-organic frameworks for lithium-ion storage

TiO2-coated LiNi0.9Co0.08Al0.02O2 cathode materials with enhanced cycle performance for Li-ion batteries

N-doped Carbon Coated LiTi2(PO4)(3) As Superior Anode Using PANi As Carbon and Nitrogen Bi-Sources for Aqueous Lithium Ion Battery

Advanced Liti2(Po4)(3)@N-Doped Carbon Anode for Aqueous Lithium Ion Batteries

Anatase-TiO 2 /CNTs nanocomposite as a superior high-rate anode material for lithium-ion batteries

Critical Influence Of Carbon Nitride Self-Assembly Coating On The Electrochemical Performance Of Sno2-Tio2 Nanocomposite Anode Material For Lithium Ion Battery

Facile preparation of TiO2/C nanocomposites as anode materials for lithium-ion batteries

Carbon-Coated Tin-Titanate derived SnO2/TiO2 nanowires as High-Performance anode for Lithium-Ion batteries

N-doped carbon-coated interconnected TiNb2O7 hollow nanospheres as advanced anodes for lithium-ion batteries

Improved electrochemical performance of nitrogen doped TiO2-B nanowires as anode materials for Li-ion batteries

Surface Structure and High-Rate Performance of Spinel Li4ti5o12 Coated with N-Doped Carbon As Anode Material for Lithium-Ion Batteries

Vapor Pressure-Assisted Synthesis of Chemically Bonded TiO2/C Nanocomposites with Highly Mesoporous Structure for Lithium-Ion Battery Anode with High Capacity, Ultralong Cycling Lifetime, and Superior Rate Capability

Improvement of electrochemical performance of nickel rich LiNi0.6Co0.2Mn0.2O2 cathode active material by ultrathin TiO2 coating.