Abstract:Nanocomposite particles of amorphous carbon-Li4Ti5O12 (C-LTO) and carbon nanotube-Li4Ti5O12 (CNT-LTO) were synthesized by solvothermal method and subsequent high-temperature calcination. X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HR-TEM), and selected area electron diffraction (SAED) were applied to characterize the phase structure, particle morphology, and the coating structure. XRD analysis, TEM micrographs, HR-TEM images and SAED analysis revealed that both LTO particles exhibited a well- developed spinel nanocrystal structure with average sizes between 20-70 nm. The C-LTO particles exhibited roughly spherical shape coated by an amorphous carbon layer up to 10 nm in thickness. The CNT-LTO samples showed uniform square nanocrystals with edge length around 20 nm and nanoscale graphitic layers covering the surface, revealing the carbon nanotubes interconnection networks among the particle assemblies. Electrochemical studies of lithium insertion/extraction performance are evaluated by the galvanostatic charge/discharge tests, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). Both LTO particles showed the superior initial discharge capacity of more than 200 mAh/g at 1/10C rate. The irreversible capacity of the C-LTO particles at more cycles was due to large polarization resulted from excessive carbon and possible residual precursors. The CNT-LTO particles show larger reversible capacity and enhanced electrochemical Li+ insertion/extraction kinetics at different cycling rates. The comparative structural and electrochemical analyses demonstrated that both nanoscale graphitic covering layers and the CNT interconnection networks increase the electronic conductivity and improve the kinetics rates of lithium insertion/extraction in the CNT-LTO particles.

Facile preparation of TiO2/C nanocomposites as anode materials for lithium-ion batteries

Ternary Perovskite Cobalt Titanate/Graphene Composite Material As Long-Term Cyclic Anode for Lithium-Ion Battery

Facile Preparation of One-Dimensional Hollow Tin Dioxide@carbon Nanocomposite for Lithium-Ion Battery Anode

Nanocomposites As Anode for Lithium-Ion Battery

Tio2/C Composites Nanorods Synthesized by Internal-Reflux Method for Lithium-Ion Battery Anode Materials

Synthesis Of Uniform Tio2@Carbon Composite Nanofibers As Anode For Lithium Ion Batteries With Enhanced Electrochemical Performance

Sol–gel synthesis of nanocrystal-constructed hierarchically porous TiO2 based composites for lithium ion batteries

In Situ Synthesis of Carbon Incorporated Tio2 with Long-Term Performance As Anode for Lithium-Ion Batteries

Carbon-Coated Tin-Titanate derived SnO2/TiO2 nanowires as High-Performance anode for Lithium-Ion batteries

Hydrothermal Synthesis of Li4Ti5O12/TiO2 Nano-composite As High Performance Anode Material for Li-Ion Batteries

Co3O4-coated TiO2 Nanotube Composites Synthesized Through Photo-Deposition Strategy with Enhanced Performance for Lithium-Ion Batteries

One-step Nanocasting Synthesis of Mesostructured TiO2/graphitic Carbon Composite As an Anode Material for Lithium-Ion Battery

Nanostructured Si/TiC Composite Anode for Li-ion Batteries

Carbon-coated SiOx/TiO2 composite nanospheres with conductive TiO2 nanocrystals as anode materials for lithium-ion batteries

Preparation and Characterization of Porous Spherical Li_4Ti_5O_(12)/C Anode Material for Lithium Ion Batteries

Nano-TiNb2O7/carbon Nanotubes Composite Anode for Enhanced Lithium-Ion Storage

In situ synthesis of TiO2(B) nanotube/nanoparticle composite anode materials for lithium ion batteries.

Facile synthesis SnO 2 nanoparticle-modified Ti 3 C 2 MXene nanocomposites for enhanced lithium storage application

Anatase-TiO 2 /CNTs nanocomposite as a superior high-rate anode material for lithium-ion batteries

Synthesis and electrochemical performance of Li4Ti5O12/TiO2/C nanocrystallines for high-rate lithium ion batteries

Simple Synthesis of TiNb6O17/C Composite Toward High-Rate Lithium Storage