Abstract:Ni-rich cathode material is one of the most promising materials for Li-ion batteries in electric vehicles. However, fading capacity, poor cyclic stability and high pH value are still major challenges, which suppress its practical application. In this study, spherical LiNi0.9Co0.08Al0.02O2 powders with 0.4 wt% TiO2 coating layer were prepared by impregnation–hydrolysis method. Scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM) and X-ray diffraction (XRD) results show that TiO2 is uniformly coated on the surface of LiNi0.9Co0.08Al0.02O2 particle and slightly embedded into LiNi0.9Co0.08Al0.02O2 particles. After 100 cycles at 2.0C, 0.4 wt% TiO2-coated LiNi0.9Co0.08Al0.02O2 electrode delivers much higher discharge capacity retention (77.0%) than the pristine LiNi0.9Co0.08Al0.02O2 electrode (63.3%). The excellent cycling performance of 0.4 wt% TiO2-coated LiNi0.9Co0.08Al0.02O2 electrode at a high discharge ratio is due to a TiO2 coating layer which can effectively reduce the direct contact between cathode material and electrolyte, suppress the oxidation of electrolyte, improve electrical conductivity of the electrode and increase the stability of the structure.<h3 class="a-plus-plus">Graphic abstract</h3> With the increase of current density, TCNC sample clearly exhibits enhanced cycling performance with higher capacity retention, and the capacity retention of TCNC increases by 22% at 2.0 C.

Nitrogen-doped Carbon Coated TiO2 Nanocomposites As Anode Material to Improve Cycle Life for Lithium-Ion Batteries

Nitrogen-doped carbon coated anatase TiO2 anode material for lithium-ion batteries

Ternary Perovskite Cobalt Titanate/Graphene Composite Material As Long-Term Cyclic Anode for Lithium-Ion Battery

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Nitrogen-doped/carbon-coated 2D TiO2 Scaly clusters as high-performance anode for Lithium-ion batteries

High Rate Capability of TiO2/nitrogen-doped Graphene Nanocomposite As an Anode Material for Lithium–ion Batteries

Vapor Pressure-Assisted Synthesis of Chemically Bonded TiO2/C Nanocomposites with Highly Mesoporous Structure for Lithium-Ion Battery Anode with High Capacity, Ultralong Cycling Lifetime, and Superior Rate Capability

TiO2-coated LiNi0.9Co0.08Al0.02O2 cathode materials with enhanced cycle performance for Li-ion batteries

TiO2 Coated with Carbon Via Chemical Vapor Deposition As Li-Ion Batteries Anode

Synthesis and Electrochemical Performance of Nano TiO2(B)-coated Li[Li0.2Mn0.54Co0.13Ni0.13]O-2 Cathode Materials for Lithium-Ion Batteries

Design and Synthesis of N-Doped Graphene Sheets Loaded with Li4ti5o12 Nanocrystals As Advanced Anode Material for Li-Ion Batteries

Ultrathin N‐doped Carbon‐coated TiO2 Coaxial Nanofibers As Anodes for Lithium Ion Batteries

Nitrogen-Doped Carbon-Coating Disproportionated SiO Materials As Long Cycling Stable Anode for Lithium Ion Batteries

TiO 2 embedded in ultrathin N-doping carbon nanosheets derived from shape-engineered titanium metal-organic frameworks for lithium-ion storage

TiO2(B)@carbon Composite Nanowires As Anode for Lithium Ion Batteries with Enhanced Reversible Capacity and Cyclic Performance

Nanoporous TiNb2O7/C Composite Microspheres with Three-Dimensional Conductive Network for Long-Cycle-Life and High-Rate-Capability Anode Materials for Lithium-Ion Batteries

Carbon-Coated Tin-Titanate derived SnO2/TiO2 nanowires as High-Performance anode for Lithium-Ion batteries

Enhanced Lithium Storage Performance of Nanostructured NaTi2(PO4)3 Decorated by Nitrogen-Doped Carbon

N-doped Carbon Coated TiO2 Hollow Spheres As Ultralong-Cycle-life Na-ion Battery Anodes

The Optimized Tin Dioxide-Carbon Nanocomposites As High-performance Anode for Lithium Ion Battery with a Long Cycle Life

Ni-encapsulated TiO2 Nanotube Array Prepared Using Atomic Layer Deposition As a High-Performance Li-ion Battery Anode