Abstract:For electric vehicles (EVs), permanent magnet synchronous motors (PMSMs) are competitive owing to their high power factor, high efficiency and high power density. In this paper, four types of PMSMs with different rotor topologies are designed with the same motor main dimensions and the same amount of permanent magnet usage. First, the different PMSMs are compared in terms of their torque characteristics. The torque characteristic curves of the four motors are displayed with the control method i(d)=0 for surface-mounted PMSM (SPMSM) and Maximum Torque per Ampere (MTPA) for interior PMSM (IPMSM). It turns out that IPMSM has higher starting torque than SPMSM due to the reluctance torque. Among the three IPMSMs with different rotor structures, V-shape IPMSM and delta-shape IPMSM can provide higher output torque under the same current supply with the higher salient rate. More information on the no-load magnetic density, torque ripple, efficiency and demagnetization problem operated at the peak current is also provided and compared. Then the four PMSMs with the same peak current are further analyzed and compared on the flux-weakening speed-enlarge (FWSE) capability. The results show good FWSE capability for all of the four PMSMs owing to the large peak current. However, the torque of SPMSM in flux-weakening control region is slightly higher than the IPMSMs.

Comparison of five topologies rotor permanent magnet motors with improved fault-tolerance

Comparison of Dual-Stator Permanent Magnet Machines with Different Rotor Topologies

Fault-Tolerance Performance Analysis of a Five-Phase Permanent-Magnet Linear Synchronous Machine

Design and Comparison of Interior Permanent Magnet Synchronous Traction Motors for High Speed Railway Applications

Comparative Analysis of Doubly Fed Flux-Reversal Permanent Magnet Machines with Different PM Arrangements and Consequent-Pole Topologies

Design of Five-Phase Modular Flux-Switching Permanent-Magnet Machines for High Reliability Applications

Comparisons of Permanent-Magnet Machines with Different Rotor Topologies for Quadruped Robot

Comparative Study of Winding Configurations of a Five-Phase Flux-Switching PM Machine

A Comparative Study on Two Outer Rotor PMSMs for In-Wheel Direct Drive under Short-Circuit Faults

Design to Reduce Rotor Losses in Fault-Tolerant Permanent-Magnet Machines

Comparison of PMSMs with Different Rotor Structures for EV Application

Axial Flux Permanent Magnet Motor Topologies Magnetic Performance Comparison

Two Fault Tolerant Strategies for Four-Phase Permanent-Magnet Fault-Tolerant Machine

Topology Design of Axial Split Phase Permanent Magnet Fault Tolerant Motor

A Novel Five-Phase Fault-Tolerant Modular In-Wheel Permanent-Magnet Synchronous Machine For Electric Vehicles

Investigation on sensorless operation of two new fault-tolerant interior permanent magnet motors with trade-off of fault tolerance and flux-intensifying effects

A Consequent-Pole Five-Phase Fault-Tolerant Permanent-Magnet Synchronous Machine for Electric Vehicles

Design and Control of a Novel Fault-tolerant Dual-armature Winding Flux Modulated Permanent Magnet Machine

Design and Optimization of Five-Phase Fault-Tolerant In-Wheel Permanent Machine with Low Mutual-Inductance

Investigation of a Novel Five-Phase Modular Permanent-Magnet In-Wheel Motor

A Novel Fault Tolerance Structure of Arc Linear Flux Switching Permanent Magnet Motors Based on Redundant Winding