Abstract:This paper proposes a novel method for the modulation and fabrication of an aspherical microlens from a photocurable polymer for use in optical pickup heads. This novel modulation method can be employed not only to dynamically control the focal length and morphology of the microlens but also to fabricate aspherical lenses after UV curing of the photosensitive polymer. Forces in two dimensions provided by electrowetting and gradient electrostatic forces are applied to shape the polymer liquid from a hemispherical shape into a parabolic or a near- conical shape. Aspherical microlenses are designed based on constant optical-path-length theory and self-aligned by surface- tension forces. For morphology modulation, 2-D voltages are applied at the lower electrodes and between the upper and lower substrates, respectively, on a SU-8 spherical liquid-polymer droplet. The voltage applied at the lower electrodes provides an electrowetting effect on the polymer droplets, thereby reducing the contact angle of the spherical droplet, resulting in a desirable droplet height/baseline ratio for a desirable focal length. The voltage applied between the upper and lower substrates pulls up the droplet mostly at its center portion to form an aspherical shape that is close to a parabolic shape or even a conical shape. As a result, the Strehl ratio of the lens can be varied from 0.0076, as with a spherical shape, to 0.8362, as with a near-parabolic shape, and the focal-spot size can be reduced from 2.302 to 0.778 mum. The proposed method has been successfully implemented and has proven suitable for optical applications in which millimeter-diameter-size lenses with numerical apertures higher than 0.66 and focus-spot resolutions better than 0.8 mum are preferred.

Fabrication of Refractive Axicons Utilizing Electrostatic Force

Fabrication of micro-axicons using direct-laser writing.

Transmission of refractive microlens array by reactive ion beam etching

Imaging with Diffractive Axicons Rapidly Milled on Sapphire by Femtosecond Laser Ablation

High-fidelity glass micro-axicons fabricated by laser-assisted wet etching

Efficient Subwavelength Focusing of Light with a Long Focal Depth.

Design, fabrication, and testing of diamond axicons for X-ray microscopy applications

Enhancement of Axial Optical Trapping Force Using a Pair of Axicons

Self-reconstructing Bessel beam created by two-photon-polymerized micro-axicon for light-sheet fluorescence microscopy

Enhancement of axial trapping force in a single-beam gradient optical trap by a pair of axicons

Optimum Electrostatic Force Control for Fabricating a Hybrid UV-curable Aspheric Lens

Mask-Free Production of Integratable Monolithic Micro Logarithmic Axicon Lenses

Solvent-Free Nanofabrication Based on Ice-Assisted Electron-Beam Lithography.

Propagation of Gaussian Beam Through an Axicon and Its Propagation Properties

Beam Shaping With Component Of Cone Axicons In Confocal System

Planar efficient metasurface for generation of Bessel beam and super-resolution focusing

Extended Projection Distance and Sidelobe Suppression of THz Bessel Beam With Combined Axicons

Broadband Variable Meta-Axicons Based on Nano-Aperture Arrays in a Metallic Film

Electrostatic-Force-Modulated Microaspherical Lens for Optical Pickup Head

Optical Nanofabrication of Concave Microlens Arrays

Fraxicon for Optical Applications with Aperture ∼1 mm: Characterisation Study