Abstract:Microlens arrays (MLAs) made from fused silica possess broad applications in wavefront sensing, optical focusing, beam shaping, etc. However, it is challenging to fabricate the hard-brittle silica MLAs with high accuracy and low cost by conventional manufacturing techniques efficiently. In this work, a novel two-step method, which consists of rapid evaporative ablation and precision melting polishing by CO2 lasers, is proposed to fabricate high-quality MLAs. The first step is to rapidly ablate and engrave micro-pillar arrays (MPAs) with flat groove bottom by high-energy density CO2 lasers. The second step is to precisely polish and shape the flat-topped MPAs into the dome-topped MLAs with good surface roughness (Sa) by low-energy density CO2 lasers. The whole preparation process could be achieved through a set of machining system. Firstly, the geometric dimension (period, p and height, h) of the microlens is determined by the Monte Carlo ray tracing method. Secondly, to diminish the groove depth inconsistency caused by heat accumulation, the multiple ablation compensation strategy is developed. The MPAs (p = 200-400 mu m), of which maximum height error is 7.1%, are prepared in 1 s by the proposed compensation strategy. Then, the MPAs are smoothed into the MLAs by lowenergy density CO2 lasers, and the average Sa is improved from 960 nm to 32.56 nm. Finally, the optical performances of the MLAs are verified from the effectiveness of imaging, focusing and homogenization. The proposed two-step processing method paves a new way to fabricate high-performance MLAs on hard-brittle fused silica with low cost and high efficiency.

A Simple Way to Fabricate Close-Packed High Numerical Aperture Microlens Arrays

Step heat-forming photoresist method for expanding the N. A. range of refractive microlens

High Numerical Aperture Microlens Arrays Of Close Packing

Fabrication of Microlens Array with Controllable High NA and Tailored Optical Characteristics Using Confined Ink-Jetting

Fabrication of High-Quality Microlens Arrays on Fused Silica Based on Combined Rapid Evaporative Ablation and Precision Melting Polishing of CO2 Lasers

Facile and Flexible Fabrication of Gapless Microlens Arrays Using A Femtosecond Laser Microfabrication and Replication Process

Rapid Fabrication of A Large-Area Close-Packed Quasi-Periodic Microlens Array on Bk7 Glass

A Facile Method to Fabricate Close-Packed Concave Microlens Array on Cylindrical Glass

Direct Fabrication of Microlens Arrays with High Numerical Aperture by Ink-Jetting on Nanotextured Surface

Morphology adjustable microlens array fabricated by single spatially modulated femtosecond pulse

Large-Scale High Quality Glass Microlens Arrays Fabricated by Laser Enhanced Wet Etching

Simple Fabrication of Closed-Packed IR Microlens Arrays on Silicon by Femtosecond Laser Wet Etching

Maskless Fabrication Of Concave Microlens Arrays On Silica Glasses By A Femtosecond-Laser-Enhanced Local Wet Etching Method

Cost-efficient and Flexible Fabrication of Rectangular-Shaped Microlens Arrays with Controllable Aspect Ratio and Spherical Morphology

Fabrication of Close-Packed Microlens Array with Superhydrophobicity and High Imaging Performance

Micropatterning Microlens Arrays Fabricated by A Femtosecond Laser Wet Etch Process

Femtosecond Laser Fabrication of Submillimeter Microlens Arrays with Tunable Numerical Apertures

Fabrication of High Fill-Factor Aspheric Microlens Array by Dose-Modulated Lithography and Low Temperature Thermal Reflow

Controllable Preparation of Fused Silica Micro Lens Array through Femtosecond Laser Penetration-Induced Modification Assisted Wet Etching

Fabrication of the Asymmetric Double-Sided Concave Microlens Arrays by Femtosecond Laser

100% Fill-Factor Aspheric Microlens Arrays (AMLA) with Sub-20-nm Precision