Abstract:Magnetic bearings (MBs) enable the rotor to run at high speed without lubrication due to no mechanical contact. However, the inherent hysteresis of ferromagnetic materials affects the support characteristics, reducing the design performance and stability margin of MBs, especially for axial MBs using materials with high coercive force. To analyze and compensate for the hysteresis effect on the electromagnetic force in axial MBs, an efficient method is proposed in this paper. Firstly, the hysteresis properties of the ferromagnetic materials are simulated by the Preisach model, and the B-H relationships under any external magnetic field can be determined. Taking into account the non-ideal factors such as hysteresis and saturation effects, the nonlinear magnetic circuit model of the axial MBs is established. The magnetic flux density working point under different control currents and eccentric displacements can be determined through iterative calculation, and then the air gap flux density distribution and electromagnetic force of the axial MBs are calculated. On this basis, the adverse effects of hysteresis on the bearing capacity and system stability of axial MBs are analyzed. A compensation algorithm is designed based on the inverse model to reduce the hysteresis effect. The inverse model is approximated modeled by the Lissajous curve. Finally, the proposed analysis and control methods are verified by the finite element method (FEM) or experiments. The results show that the proposed analysis method is capable of accomplishing good accuracy and requires less computation time than FEM, it can be applied to arbitrary current variation processes. In addition, the phase lag of the system is effectively improved with the compensation algorithm.

Influence from Force Perturbation to Position Demodulation in Self-Sensing Active Magnetic Bearing

The Precise Modeling and Analysis of Demodulation Approach in Self-sensing Active Magnetic Bearings

Self-sensing Active Magnetic Bearing Using Real-Time Duty Cycle

Dynamic and static characteristics analysis of air-gap magneticfield of a large displacement angular vibrator

Self-sensing active magnetic bearing using wavelet based position estimation algorithm

A Multifrequency Disturbances Identification and Suppression Method for the Self-Sensing AMB Rotor System

Position Estimation Accuracy Improvement Based on Accurate Modeling of Self-Sensing Active Magnetic Bearings

Rotor Position Estimation Strategy for Self-Sensing Active Magnetic Bearing Considering Eddy Currents

Research on Flux Observers in Active Magnetic Bearings

Current Compensation Control of Multiple Frequency Vibrations of the Rotor in Active Magnetic Bearing High Speed Motors

Self-sensing active magnetic bearing using Hilbert transform

Experimental Investigation on Dynamic Behaviour of Active Magnetic Bearing-Rotor System Subject to Base Vibration

Power Amplifier for Active Magnetic Bearings Based on Flux Observer

Analysis of Torque Ripples of Vector-Controlled Permanent Magnet Synchronous Motors

Study on Inverter-fed Three-pole Active Magnetic Bearing

Analysis of the Sideband Electromagnetic Noise in Permanent Magnet Synchronous Motors Generated by Rotor Position Error.

Research on Electromagnetic and Vibration Characteristics of Dynamic Eccentric PMSM Based on Signal Demodulation

Analysis and Compensation of Hysteresis Effect on Electromagnetic Force in Axial Magnetic Bearings

Effects of Eddy Current on Ripple Current of the Switching Power Amplifier for Magnetic Bearings

Cooperative Rotor Position Estimation of Active Magnetic Bearings with Unsaturated Magnetic Bias

Modeling and Analysis of Electromagnetic Force, Vibration, and Noise in Permanent-Magnet Synchronous Motor Considering Current Harmonics