Abstract:Serrated chips, consisting of extremely uneven plastic deformation, are a prominent feature of high-speed machining of difficult-to-machine materials. This paper focuses on the evolution of chip form, chip morphology features (chip free surface, tool-chip contact surface, and chip edge), and chip segment parameters in subsequent high-speed ( v c =50 and 150 m min −1 ) machining of selective laser melted (SLMed) Ti6Al4V alloys, which are significantly different from conventional Ti6Al4V alloy in microstructure, mechanical properties and machinability. The effect of laser beam scanning schemes (0°, 67.5°, and 90°), machined surfaces (top and front), and cutting speeds on serrated chip characteristics of SLMed Ti6Al4Valloys was investigated. Based on the Johnson-Cook constitutive model of SLMed Ti6Al4V alloys, an orthogonal cutting model was developed to better understand the effect of physical-mechanical properties on the shear localization, which dominates the formation mechanism of serrated chips in post-machining of SLMed Ti6Al4V alloy. The results showed that the critical cutting speed (CCS) for chip serration of SLMed Ti6Al4V alloy is lower than that for serrated chips of conventional Ti6Al4V alloy, and the serrated profile of SLMed Ti6Al4V chips was more regular and pronounced. Besides, due to anisotropic microstructure and mechanical properties of SLMed Ti6Al4V alloys, the serration degree of chips produced on the top surfaces of SLMed Ti6Al4V alloys is more prominent than that of chips generated on the front surfaces. In addition, because of the poor deformation coordination and high plastic flow stresses of needle-like martensite α′, the plastic flow and grain distortion in the adiabatic shear band (ASB) of SLMed Ti6Al4V chips are significantly smaller than those in the ASB of conventional Ti6Al4V with equiaxed grains.

Thermo-plastic Shear Wave Induced Adiabatic Shear Banding in High Speed Machining

Finite Element Analysis of Adiabatic Shear Band Formation in Titanium Alloy Cutting Process

Simulation of Chip Formation in High-Speed Hard Machining

Study on the Effect of Tool Inclination Angle in Machining Process Based on Three-Dimensional Thermo-Elastic-Plastic Model

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

Experimental study on the process of adiabatic shear fracture in isolated segment formation in high-speed machining of hardened steel

Research on Dynamic Constitutive Relation of Materials Taking Account of Damage Evolution and Fracture Law for High Speed Cutting

Dynamic behavior and formation mechanism of shear band during high-speed cutting Inconel 718

On Adiabatic Shear Fracture in High-Speed Machining of Martensitic Precipitation-Hardening Stainless Steel

Understanding The Deformation Of Metals In High Speed Cutting

Serrated chip characteristics and formation mechanism in high-speed machining of selective laser melted Ti6Al4V alloys

Component Analysis of Adiabatic Shear Band Formed in High Speed Cutting of High Strength Alloy Steel

Experimental and Analytical Study on Adiabatic Shear Localized Fracture Characteristics in High-Speed Machining of Pure Titanium Alloy

An Investigation into the Microstructure of Adiabatic Shear Banding in AISI 1045 Hardened Steel Due to High Speed Machining

Microstructure Evolution of Adiabatic Shear Bands and Mechanisms of Saw-Tooth Chip Formation in Machining Ti6Al4V

Some metallurgical observations of adiabatic shear phenomenon during high speed machining AISI 1045 hardened steel

Adiabatic Shear Banding in Aisi 1045 Steel During High Speed Machining: Mechanisms of Microstructural Evolution

On Adiabatic Shear Localized Fracture During Serrated Chip Evolution in High Speed Machining of Hardened AISI 1045 Steel

Microcosmic Mechanism of Material Softening and Fracture in Primary Shear Zone During High Speed Machining of Hardened Steel

Adiabatic Shear Localization in High Speed Cutting of Hardened Steel

A review of microstructural evolution in the adiabatic shear bands induced by high speed machining