Abstract:This paper aims to explore the evolution of microstructural parameters induced during the cutting of Ti6Al4V alloy (TC4). The microstructure characteristics of the workpiece material is directly tied to its mechanical response during machining. During TC4 cutting, microstructure evolution is observed as a result of severe plastic deformations. The characterization of this phenomenon has significant interest from both academia and industry. In this work we present a developed modeling technique which combines the Particle Finite Element Method (PFEM) with incremental homogeneous field distributions. First, the PFEM is extended to perform a thermo-mechanical analysis capable of capturing the material responses of TC4 during orthogonal cutting. To generate serrated chips, an appropriate strain softening-based constitutive plasticity model i.e., TANH (Hyperbolic TANgent) is utilized. The PFEM's validity is checked through comparison with available experimental results in terms of chip shapes and cutting forces. Second, the evolution of microstructural parameters such as dislocation density, vacancy concentration, dynamic recrystallization (DRx) grain size, and hardness is incrementally developed and incorporated into the PFEM using internal state variables as homogeneous field distributions. The Johnson–Mehl–Avrami–Kolmogorov (JMAK) model and Hall–Petch equation are applied for predicting grain size and hardness, respectively. The parameters of the corresponding models are modified for TC4 to accurately capture their alterations. Lastly, the predicted results of the microstructure evolution in serrated chips and machined surfaces, including average grain size and hardness, are compared with experiments, demonstrating good agreement. This implies that the PFEM combined with microscale schemes can reliably simulate the machining process of the TC4.

Microstructure Evolution of Adiabatic Shear Bands and Mechanisms of Saw-Tooth Chip Formation in Machining Ti6Al4V

Mechanism of Saw-Tooth Chip Formation of Titanium Alloy Based on Finite Element Simulation

Finite Element Analysis of Adiabatic Shear Band Formation in Titanium Alloy Cutting Process

Serrated chip characteristics and formation mechanism in high-speed machining of selective laser melted Ti6Al4V alloys

Effect of cutting conditions on the serrated chip formation in high-speed cutting

Understanding The Deformation Of Metals In High Speed Cutting

Simulation of Chip Formation in High-Speed Hard Machining

Influence of Tool Geometrical Parameters on High Speed Cutting of Titanium Alloy Ti6Al4V

On understanding the chip formation mechanism of TiBw/TA15 composites with network architecture in micro cutting

Investigation of Serrated Chip Morphology Change Regular in the Burning of Titanium Alloys

Microstructure evolution modeling of Ti6Al4V alloy during cutting using the Particle Finite Element Method and homogeneous field distributions

The Taguchi orthogonal analysis of Ti6Al4V titanium alloy chip morphology in micro-milling

Chip Formation Mechanism in Dry Hard High-Speed Orthogonal Turning of Hardened AISI D2 Tool Steel with Different Hardness Levels

Numerical investigation on serrated chip formation during high-speed milling of Ti-6Al-4V alloy

In-situ test of full field deformation and chip formation mechanism during machining of Ti 2 AlNb intermetallic with digital image correlation method

Microstructural Evolution of Shear Localization in High-Speed Cutting of CoCrFeMnNi High-Entropy Alloy

Adiabatic shear instability in a titanium alloy: Extreme deformation-induced phase transformation, nanotwinning, and grain refinement

Chip formation characteristics of selective laser melted Ti–6Al–4V

Experimental contribution to the study of the Ti6Al4V chip formation in orthogonal cutting on a milling machine

Study of segmented chip formation in cutting of high-strength lightweight alloys

Effects of Ultrasonic Vibration Assistance on Chip Formation Mechanism in Cutting of Ti–6Al–4V