Abstract:High-performance polysilicon (P-Si) is fundamental as a resource for manufacturing semiconductor devices with high photoelectric properties. However, experimentally characterizing the solidification process in detail has been difficult on account of the extremely rapid cooling rate and limited available characterization methods. Therefore, this study used molecular dynamics (MD) to investigate Si crystallization behavior through directional solidification at different cooling rates. The entire system was first analyzed in terms of energy and radial distribution function, after which the microstructural evolution was characterized by visualization. Results indicated that the cooling rate significantly affected the directional solidification of Si, and an excessively high cooling rate resulted in a decrease in the long-range order of the system. At the same cooling rate, the crystallization rates of (1 0 0), (1 1 0), and (1 1 1) crystal faces followed a descending order. The configurations of the S-L interface with different crystal faces were distinct. Specifically, while the atom numbers of defect structures that were formed in systems of (1 0 0) and (1 1 0) crystal faces were few, those formed in the (1 1 1) crystal face were more. It was difficult for the (1 0 0) crystal face to form dislocations regardless of the crystallization degree at different cooling rates, and the (1 1 0) crystal face only formed a few dislocations at high cooling rates. Dislocations formed at all cooling rates during the directional solidification of the (1 1 1) crystal face, and there was a weak correlation between the number of dislocations and cooling rates. Twinning mainly occurred during the solidification process of the (1 1 1) crystal face, and there was no obvious linear relation between its number and the cooling rate. Moreover, when high-energy dislocations occurred more often, the system stability decreased. Overall, this work will be helpful to understand the commonness and difference in directional solidification of Si with different crystal faces at different cooling rates.

Structural properties in liquid Si during rapid cooling processes

Liquid Structure of Al-Si Alloy: A Molecular Dynamics Simulation

Structural And Dynamical Properties Of Liquid Cu80si20 Alloy Studied Experimentally And By Ab Initio Molecular Dynamics Simulations

Dynamics and Diffusion Mechanism of Low-Density Liquid Silicon.

Molecular dynamics simulation of silica liquid and glass

Ab Initio Molecular Dynamics Simulations on Structural Change of Supercooled Liquid Si at Different Temperatures from 1700 to 1100K

Liquid-Liquid Phase Transition in Supercooled Silicon

Polymorphism in glassy silicon: Inherited from liquid-liquid phase transition in supercooled liquid

Study on Si-like and topologically close-packed structures during rapid solidification of Au-Si alloys

Liquid-liquid phase transition in deeply supercooled Stillinger-Weber silicon

Hidden State of Si 50 Ge 50 Nanoparticles During Rapid Solidification

The Study of Melting Stage of Bulk Silicon Using Molecular Dynamics Simulation

Properties of the structural defects during SiC–crystal–induced crystallization on the solid–liquid interface

Structure and dynamical properties during the solidification of the liquid aluminum induced by cooling and compression

Voronoi Structural Evolution of Bulk Silicon Upon Melting

Atomistic simulations of carbon diffusion and segregation in liquid silicon

Molecular Simulation of Covalent Bond Dynamics in Liquid Silicon

Structural and dynamic features of liquid Si under high pressure above the melting line minimum

Structure and Dynamical Properties During Solidification of Liquid Aluminum Induced by Cooling and Compression

Molecular dynamics simulation of the recrystallization of amorphous Si layers: Comprehensive study of the dependence of the recrystallization velocity on the interatomic potential

Analysis of Structural Development and Defects during the Anisotropic Growth of Silicon