Abstract:Dislocations and other atomic-level defects play a crucial role in determining the macroscopic properties of crystalline materials, but it is extremely difficult to observe the evolution of dislocations due to the limitations of the most advanced experimental techniques. Therefore, in this work, the rapid solidification processes of Ni47Co53 alloy at five cooling rates are studied by molecular dynamics simulation, and the evolutions of their microstructures and dislocations are investigated as well. The results show that face-centered cubic (FCC) structures are formed at the low cooling rate, and the crystalline and amorphous mixture appear at the critical cooling rate, and the amorphous are generated at the high cooling rate. The crystallization temperature and crystallinity decrease with cooling rate increasing. Dislocations are few at the cooling rates of 1 × 1011 K/s, 5 × 1012 K/s, and 1 × 1013 K/s, and they are most abundant at the cooling rates of 5 × 1011 K/s and 1 × 1012 K/s, in which their dislocation line lengths are both almost identical. There appear a large number of dislocation reactions at both cooling rates, in which the interconversion between perfect and partial dislocations is primary. The dislocation reactions are more intense at the cooling rate of 5 × 1011 K/s, and the slip of some dislocations leads to the interconversion between FCC structure and hexagonal close packed (HCP) structure, which causes the twin boundaries (TBs) to disappear. The FCC and HCP are in the same atomic layer, and dislocations are formed at the junction due to the existence of TBs at the cooling rate of 1 × 1012 K/s. The present research is important in understanding the dislocation mechanism and its influence on crystal structure at atomic scales.

Structure and Dynamical Properties During Solidification of Liquid Aluminum Induced by Cooling and Compression

Structure and dynamical properties during the solidification of the liquid aluminum induced by cooling and compression

Structural Origin Underlying the Effect of Cooling Rate on Solidification Point

Microscopic Structure Evolution and Amorphous Solidification Mechanism of Liquid Quinary Zr<sub>57</sub>Cu<sub>20</sub>Al<sub>10</sub>Ni<sub>8</sub>Ti<sub>5</sub> Alloy

Cluster Structure And Dynamics Of Liquid Aluminum Under Cooling Conditions

Cooling Rate Dependence of Structural Properties of Aluminium During Rapid Solidification

Rapid Solidification Structure Refinement Mechanism in Highly Undercooled Cu Based Ternary Alloys

Atomic Structural Competition in the Al 85.5 Ni 9.5 La 5 Alloy During Liquid-to-Solid Transition

Pressure-induced Structural Change and Nucleation in Liquid Aluminum

Solidification Microstructure in a Supercooled Binary Alloy

Ab initio study of local structures during cooling of liquid Fe-C and Fe-Cr-C alloys

Stability of microstructure during cooling processes of Al liquid metal

Abnormal Orderly Transformation in Supercooled State of an Al-based Alloy

The Solidification of Cucr Alloys under Various Cooling Rates

Solidification Structure Formation of Undercooled Single Phase Alloys

Molecular dynamics simulation studies of structural and dynamical properties of rapidly quenched Al

Dislocation Mechanism of Ni47Co53 Alloy During Rapid Solidification

The Effect of Cooling Rate on the Microstructure Change During Rapid Solidification of Liquid Ti3Al Alloy

Composition- and Temperature-Dependent Liquid Structures in Al–Cu Alloys: Anab Initiomolecular Dynamics and X-Ray Diffraction Study

Non-equilibrium Effects on Solid Transition of Solidification Microstructure of Deeply Undercooled Alloys

Simulation of Molecular Dynamics of Silver Subcritical Nuclei and Crystal Clusters During Solidification