Abstract:To investigate structural changes, the Cu95Fe5 alloy system was subjected to cooling rates of 1 × 1013 K/s, 2 × 1012 K/s, 2 × 1011 K/s, and 2 × 1010 K/s using the molecular dynamics simulation method. The results revealed that decreasing the cooling rate caused an increase in the phase transition temperature. Further, the structure of the alloy system exhibited a tendency towards increased stability following cooling at lower cooling rates. The Fe precipitation behavior of the Cu95Fe5 alloys during cooling at the rate of 2 × 1010 K/s was further explored, with the results suggesting that the formation and growth of the Fe cluster is a continuous process governed by the nucleation and growth mechanism. The size and number of Fe clusters formed at different stages were found to be affected by three factors, namely, the interaction force between the Fe atoms, the diffusion ability of the Fe atoms, and the interfacial energy between the Fe cluster and Cu matrix. When the alloy temperature exceeded 1400 K, the accumulation of the Fe atoms was facilitated by their strong interaction. However, the high temperatures and the large diffusion coefficient of the Fe atoms acted as inhibitors to the growth of Fe clusters, despite the intense thermal activities. As the temperature was reduced from 1400 K to 1050 K, the Fe atoms moved with a reduced intensity in a narrower area, and both the number of Fe atoms in the largest cluster and the number of clusters increased due to the action of the interaction force between the Fe atoms. Upon lowering the temperature from 1050 K to 887 K, the size of the largest Fe cluster increased rapidly, while the number of clusters decreased gradually. The growth of the largest Fe cluster could be partly attributed to the diffusion of single Fe atoms into the cluster under the action of the interaction force between the Fe atoms, in addition to the gathering and combination of multiple clusters. When the temperature was lowered from 967 K to 887 K, the diffusion coefficient of the Fe atoms approached 0, indicating that the non-diffusive local structure rearrangements of atoms dominated in the system structure change process. The interface energy governed the combination of the Fe clusters in this stage. At a temperature below 887 K, the alloy crystallized, the activities of the Fe atoms were reduced due to a low temperature, and the movement range of the Fe atoms was small at a fast cooling rate. As such, both the size and number of Fe clusters showed no obvious changes.

Competition between TCP and crystalline clusters during phase transition of rapidly super-cooled aluminum

Minimum Interface Misfit Criterion for the Precipitation Morphologies of TCP Phases in a Ni-based Single Crystal Superalloy

Molecular dynamics simulation studies of structural and dynamical properties of rapidly quenched Al

The dynamic competition mechanism between the topologically close-packed and BCC structures during crystallization of undercooled zirconium

Atomic structure evolutions and mechanisms of the crystallization pathway of liquid Al during rapid cooling

Solidification Microstructure in a Supercooled Binary Alloy

The role of TCP structures in glass formation of Ni50Ag50 alloys

Solidification Microstructure Evolution and Grain Refinement Mechanism under High Undercooling of Undercooled Ni90Cu10 Alloys

Molecular Dynamics Simulation of Homogeneous Nucleation and Growth of Supercooled Al Liquid

Rapid Solidification Structure Refinement Mechanism in Highly Undercooled Cu Based Ternary Alloys

Ab initio study of local structures during cooling of liquid Fe-C and Fe-Cr-C alloys

Simulation Study of the Effets of Various Cooling Rates on Evolution Properties of Micro-Cluster Structure During Solidification Processes of Liquid Metal Cu

Molecular Dynamics Research on Fe Precipitation Behavior of Cu95Fe5 Alloys during Rapid Cooling

Atomic-Level Mechanisms of Nucleation of Pure Liquid Metals during Rapid Cooling.

Cluster Structure And Dynamics Of Liquid Aluminum Under Cooling Conditions

Observation of Dendrite Growth Velocity and Microstructure Transition in Highly Undercooled Single Phase Alloys

Pattern Formation under Deep Supercooling by Classical Density Functional-Based Approach

Structure and dynamical properties during the solidification of the liquid aluminum induced by cooling and compression

Molecular Dynamics Study on Microstructural Evolution During Crystallization of Rapidly Supercooled Zirconium Melts

Common Mechanism for Controlling Polymorph Selection During Crystallization in Supercooled Metallic Liquids

Effects of Cooling Rate on the Solidification Process of Pure Metal Al: Molecular Dynamics Simulations Based on the MFPT Method