Abstract:Single stage G-M cryocoolers (GMCs) with high cooling capacity at 20-50 K provide significant benefit for the field of high temperature superconductors, however, their working efficiency can still be improved for commercial applications. Numerical simulations can serve as a valuable guide for precise optimization of the GMC because they allow one to study its internal operating characteristics. In this research, a twodimensional, transient model of a single stage GMC with a mechanically driven displacer is built and studied using computational fluid dynamics (CFD) simulation. The modelling method has been tested and experimentally verified. It enables a view of the instantaneous non-uniform flow and temperature distributions inside the GMC. Additionally, the effects of cold end channels on the heat transfer efficiency of the cold heat exchanger while operating at a large cooling power are analyzed. The results show that during certain periods of a cycle, most of the regenerator near the cold end remains at almost the same low temperature with no temperature gradient due to the small heat capacity of the materials compared to that of the helium gas; while most of the pressure drop occurs in the region near the hot end due to the high viscosity of helium-4. For a good cooling performance at low temperatures, the cold end channels should be distributed uniformly to guarantee a uniform flow and temperature distribution in the regenerator; while for a high output cooling power at high temperatures, they should be designed to enhance the heat exchange between the gas and the cold heat exchanger as much as possible. (C) 2017 Elsevier Ltd. All rights reserved.

Study on the dynamic cooling performance of a -150°C reverse Brayton cycle air cryocooler

Study on the Dynamic Cooling Performance of A-150 ℃ Reverse Brayton Cycle Air Cryocooler

Numerical study on dynamic cooling performance of reverse Brayton cycle air cryocooler

Refrigeration characteristic experiment in 40 K region of a two-stage pulse tube cryocooler driven by a standing wave thermoacoustic engine

Numerical Study on the Working Performance of a G-M Cryocooler with a Mechanically Driven Displacer

Design of Turbo-Brayton Cycle Cryocooler Test Rig.

Experimental study on a small Brayton air refrigerator under −120°C

Developments in reverse Brayton cycle cryocooler in China

Study on the Turbo Expansion Characteristic of a Reverse Brayton Air Refrigerator

Transient Cooling and Operational Performance of the Cryogenic Part in Reverse Brayton Air Refrigerator

Numerical and Experimental Studies on Stability of Cryogenic Turbo-Expander with Protuberant Foil Gas Bearings

Experimental Study On A Small Brayton Air Refrigerator Under-120 Degrees C

Experimental Study on the Performance of a Small Inverse Brayton Air Refrigerator at -120 ℃

Experimental Study on a Floating Scroll-Type Compressor Driving a Precooled JT Cryocooler

Study on Cooling Capacity Characteristics of an Open-Cycle Joule-Thomson Cryocooler Working at Liquid Helium Temperature

Initial Test Results for a -80°C Turbo Reverse Brayton Air Refrigerator.

Experimental Investigation on a Closed-Cycle Single-Stage Turbo-Refrigerator for Deep Freezing

Performance Analysis on Free-Piston Stirling Cryocooler Based on an Idealized Mathematical Model

Study on the matching performance of a low temperature reverse Brayton air refrigerator

Theoretical and Experimental Study for the Transient Behavior of a Linear Compressor During Pulse Tube Cryocooler Cool Down Process

Experimental analysis on the performance of a regenerative brayton refrigeration cycle