Abstract:High-strength steel structures have favorable mechanical properties and perform economically, but their application in seismic design is limited owing to their poor deformation capacity. In order to evaluate the hysteretic performance of Q690 high-strength steel box-section beam–columns and to assess the rationality of applying Eurocode 3 (EC3) to classify cross-sections of high-strength steel, three non-thin-walled welded box-section beam–columns were designed, and horizontal cyclic loading tests under constant axial force were undertaken. The hysteretic response of the specimens was analyzed from the standpoint of the failure mode, the degree of plastic evolution in the cross-section, energy dissipation capacity and ductility. Following this, numerical models verified from the experimental results were used for a parametric analysis to obtain the hysteretic response over a wider range of variables. The test results show that the local buckling failure of the plate at the base of the beam–column determines the failure mode of all three specimens. For a low axial compression ratio, a section with small width to thickness ratio may experience fracture. The parameter analysis showed that there is a flange-web interaction, and the evolution of cross-section plasticity under axial force is also related to the plate width to thickness ratio. In addition, through an analysis of the degree of plasticity in the cross-section under different parameter combinations, it is found that the classification of high-strength steel box-sections by the current specification is not rational, and that EC3 may be unreliable for 690 MPa box-section columns with Class 1 and Class 2 cross-sections, especially with a large axial compression ratio. A new cross-section classification method suitable for high-strength steel columns considering the influence of web-flange interaction and axial compression should be explored.

Experimental study of Q460c high strength steel welded H-section and box-section columns under cyclic loading

Experimental Study on Hysteretic Behavior of High Strength Steel Box-Section Columns

Experimental Study of Confined Hot-Rolled H-shape Steel Columns under Cyclic Loading

Experimental Study on Seismic Behavior of 460mpa High Strength Steel Box-Section Columns

Low Cyclic Fatigue Performance of Concrete-Filled Steel Tube Columns

Experimental Research on Behavior of 460 MPa High Strength Steel I-section Columns under Cyclic Loading

Experimental and numerical investigation on the overall buckling behavior of Q460 high strength steel welded I-section columns

Experimental and numerical investigation on Q690 high strength steel beam-columns under cyclic lateral loading about weak axis

Hysteretic performance of thin-walled Q690 high-strength steel H-section beam-columns bent about the weak-axis

Overall buckling behavior of Q460 high strength steel welded box section columns under axial compression

Seismic Performance of Welded Stainless Steel H-Section Columns under Cyclic Horizontal Loading

Local buckling and hysteretic behavior of Q690 high-strength steel box-section beam–columns

Finite Element Analysis on the Hysteretic Behavior of High Strength Steel Columns under Cyclic Loading

Seismic Performance of Steel-Reinforced Concrete Columns with Q690 High-Strength Steel

Experimental and Analytical Investigation on Seismic Behavior of Q690 Circular High‐strength Concrete‐filled Thin‐walled Steel Tubular Columns

Cyclic Loading Test on Welded Connection of High Strength Steel Q460C

Mechanical Behavior of Q460 High-Strength Steel under Low-Cycle Fatigue Loading

Cyclic Testing of Q690 Circular High-Strength Concrete-Filled Thin-Walled Steel Tubular Columns

Local Buckling of 460mpa High Strength Steel Welded Section Stub Columns under Axial Compression

Seismic Behavior of Q690 Circular HCFTST Columns under Constant Axial Loading and Reversed Cyclic Lateral Loading

Experimental study of high strength structural steel Q460D under cyclic loading