Abstract:Practical use of high-strength (HS) steel in contemporary construction has become one of the most important design solutions. Loading capacities of columns may benefit enormously from the HS steel, whilst their overall buckling behaves differently compared with conventional mild (CM) steel columns due to varying effects of initial imperfections and inelastic properties of the HS steel materials. Despite a number of investigations regarding the HS steel columns being undertaken, there is lack of research focused on variation of HS steel grades and their effects. To deepen understanding of overall buckling behaviour of the HS steel columns, a comprehensive review of an extensive body of column test data available in the literature is carried out in the present paper, based on which a three-dimensional finite element (FE) model developed herein is validated. Parametric analyses are subsequently undertaken with various HS steel grades, welded cross-sectional geometric parameters, slenderness values and initial imperfections being involved. The FE analysis results are also compared with calculation values in accordance with national standards. It has been demonstrated that with an increase of the grade of HS steel, effects of imperfections decrease whilst that of Y/T ratios are rather limited; reduction effects on the overall buckling strength become less severe, and therefore higher column curves available in current national standards may be selected and imperfection factors in the alternative column curve equations proposed herein descend accordingly. In addition, new theoretical column curves based on Perry-Robertson formula are developed by introducing imperfection parameters independent on the steel strength.

Experimental and numerical investigation on the overall buckling behavior of Q460 high strength steel welded I-section columns

Overall buckling behavior of Q460 high strength steel welded box section columns under axial compression

Experimental and numerical investigation on Local-Overall interactive buckling behavior of welded I-Section steel columns

Overall Buckling Behavior of 460 Mpa High Strength Steel Columns: Experimental Investigation and Design Method

Overall buckling behavior of 960 MPa high strength steel welded section columns subjected to axial compression

Experimental Study on Local Buckling of High Strength Steel I-section Stub Columns under Axial Compression

Experimental Investigation of the Overall Buckling Behaviour of 960mpa High Strength Steel Columns

Research on interactive buckling behavior of welded steel box-section columns

Numerical Investigation and Design of Thin-Walled Complex Section Steel Columns

Experimental Study on Column Buckling of 420 MPa High Strength Steel Welded Circular Tubes

Global Buckling Behavior of Welded Thick H-Shaped Axial Compression Columns of Q460GJ Steel

Experimental Investigation on the Local Buckling Behavior of 960 MPa High Strength Steel Welded Section Stub Columns

Experimental Study On The Interactive Buckling Of Welded Section Steel Columns Under Axial Compression

Local Buckling of 460mpa High Strength Steel Welded Section Stub Columns under Axial Compression

INVESTIGATION ON DESIGN METHOD OF OVERALL BUCKLING BEHAVIOUR FOR Q420 HIGH STRENGTH STEEL EQUAL-LEG ANGLE MEMBERS UNDER AXIAL COMPRESSION

Experimental and numerical investigation on flexural-torsional buckling of Q460 steel beams

Axial compression behaviour of welded high-strength H-columns experimental tests and numerical simulations

Global Buckling of S35657 Austenitic Stainless Steel Welded Box- and I-section Long Columns under Axial Compression

Local–overall Interactive Buckling Behaviour of Welded Stainless Steel I-section Columns

Overall Buckling Behaviour and Design of High-Strength Steel Welded Section Columns

Local Buckling Behavior of Welded Stub Columns with Normal and High Strength Steels