Abstract:The iron element in electric arc furnace (EAF) slag is extremely difficult to recycle due to the low specific magnetic susceptibility of the RO phase (a solid solution of FeO, MgO, CaO, and MnO). Landfilling EAF slag is strictly forbidden for environmental consideration because of poisonous Cr6+ leaching. The original RO phase could be transformed to a spinel structure, whose specific magnetic susceptibility is much higher than that of other minerals, through hot modification, resulting in significantly increased iron recovery by magnetic separation. Precipitation of spinel crystals encloses chromium, such that iron and chromium could be recovered simultaneously. The chromium in obtained iron concentrates is considerably useful for stainless steel making rather than polluting the environment. As a result, recovering iron and chromium is truly beneficial for cleaner production. Hot modification of EAF slag should be conducted at 1500–1600 °C for at least 60 min to guarantee homogeneous liquid slag. The liquid slag was poured onto an iron mold to obtain modified slag (MS) through air quenching. MS was characterized by thermodynamic analysis, X-ray diffraction, and scanning electron microscopy combined with energy-dispersive spectroscopy to correlate the relationship between mineral structures and iron recovery. The iron recovery rate of MS first increased and then decreased with increasing modifier. It was less than 10% when the modifier addition amount was below 12 wt.%, but it increased rapidly as the modifier addition amount increased from 16 to 24 wt.%, mainly due to spinel formation. The highest iron recovery rate was 81.9% when the modifier amount reached 20 wt.%. Meanwhile, Cr6+ was enriched in the spinel phase but was not observed in other minerals. Industrial tests were performed on-site with the modifier ranging from 12 to 18 wt.% because additional heat was not provided during the tests. Results showed that MS with 18 wt.% modifier addition exhibited an iron recovery rate of 61.0%, much higher than that (34.6%) of the original slag.

Effect of Temperature on Recovery of Iron from Waste Slag of Pyrite Processing

Recovery of iron from waste slag of pyrite processing using reduction roasting magnetic separation method

Study on Separation of Iron from Waste Slag of Pyrite Processing

Recovery of valuable elements from pyrite pyrolysis slag using magnetic separation-flotation technique

Experiment on Reducing Agent for Recovering Iron from Pyrite Sulfur Refining Slag by Reduction Roasting and Magnetic Separation

Experimental study on the copper slag reduction process

Recovery of iron from pyrite cinder by suspension magnetization roasting-magnetic separation method: Process optimization and mechanism study

A Thermodynamic and Experimental Assessment of the Recovery of Copper, Iron, Zinc, and Lead from Copper Slag

Effect of Iron Phase Evolution on Copper Separation from Slag Via Coal-Based Reduction

Development of Iron Recovery Technique from Steelmaking Slag by Reduction at High Temperature

Synergetic modification of industrial basic oxygen furnace slag and copper slag for efficient iron recovery

Novel method for improving iron recovery from electric arc furnace slag: on-site hot modification

Innovative Methodology for Comprehensive Utilization of Iron Ore Tailings: Part 1. the Recovery of Iron from Iron Ore Tailings Using Magnetic Separation after Magnetizing Roasting.

Experiments on effect of red mud-based slag on distribution of sulfur in liquid iron

Innovative methodology for the utilization of low-grade pyrite cinder containing heavy metals via hydrothermal alkali melting followed by chlorination roasting

Effect of Oily Sludge Treatment with Molten Blast Furnace Slag on the Mineral Phase Reconstruction of Water-Quenched Slag Properties

A new eco-friendly approach for recovery of iron from copper smelting slag: Using CO2 and Cl2 recycling strategies

Control of Copper Content in Flash Smelting Slag and the Recovery of Valuable Metals from Slag—A Thermodynamic Consideration

Eco-friendly iron extraction from fe-containing copper smelting slag via reduction roasting with coal and magnetic separation: Experimental and mechanism insights

A Novel Method of Extracting Iron from High-Iron Red Mud and Preparing Low-Carbon Cement Clinker from Tailings

Increase in Recovery Efficiency of Iron-Containing Components from Ash and Slag Material (Coal Combustion Waste) by Magnetic Separation