Abstract:In this paper,a 4×4 optical switch matrix based on free carrier dispersion effect is designed and fabricated on silicon-on-insulator(SOI) water by a 0.8 μm standard commercial CMOS line.It consists of four electro-optic 2×2 multimode imaging-based Mach-Zehnder interferometers.As a basic unit,the proposed switch matrix can be extended to n×n matrix switch and used in both optical space-division and optical time-division switching networks.The two paired MMIs in each Mach-Zehnder structure are used as 3 dB power splitters and combiners.Each switching element is electrically driven with an independent extermal power supply.By injecting free carriers into phase shifter with the active forward P-i-n diode,the π phase shift required for switching action is achieved.Experimental results show that the 4×4 silicon photonic switch matrix has the crosstalk level lower than-8.02 dB with a common spectral bandwidth as large as 35 nm,which is from 1 530 nm to 1 565 nm.Furthermore,when a specific square-wave signal with 10%-90% transition time of 5 ns is loaded,the switching response time is measured to be 17.4 ns for the rising edge and 21 ns for the falling edge,respectively.

Development of 1×4 MEMS Multifunction Integrated Optical Device

1x6 Compound-Driven Optical Mems Device For Multifunctional Fiber Optic Communication

1 × 8 MEMS Flexible Integrated Optical Device for Optical Fiber‐based Networking Applications

Dualfunctional MEMS Optical Device with Compound Electrostatic Actuators for Compact and Flexible Photonic Networks

Design and Performance of MEMS Multifunction Optical Device Using a Combined In-Plane and Out-of-Plane Motion of Dual-Slope Mirror

Multi-channel Optical Switching Based on Scanning Mirror Instrumentation

A 4×4 MMI-MZ optical switch matrix on SOI based on carrier injection

A 1 × 4 Polymeric Digital Optical Switch Based on the Thermo-Optic Effect

Monolithically Integrated MEMS Optical Device with Switching and Attenuating Function

Development of GaAs 1×N and N×N MMI Optical Switch for Optical Communications

Low-voltage Micromachining-Based Scalable Optical Switch

Novel Multifunctional Device for Optical Power Splitting, Switching, and Attenuating

Scalable Nonblocking &Lt;inline-Formula> &Lt;tex-Math Notation="latex">$4\times4$ &Lt;/tex-Math> &Lt;/inline-Formula> Silicon Optical Switch Based on Dual-Microring Resonators

Development of Silicon Photonic Devices for Optical Interconnects

Novel MEMS Torsional Mirror Optical Switch

Mach–Zehnder-Based Four-Port Switching Module on SOI

An Ultra-Compact 4 x 4 and 8 x 8 Optical Switch Based on Dual-Microring Resonators

A Novel Variable Optical Attenuator Based on Micro-Electromechanical System (MEMS)

The Fabrication of 16*16 MEMS-Based Optical Switch with Accurate Optical Fiber Grooves Integration

16×16 Mirror type optical switch with integrated fiber alignment and steady switching state

Design and Fabrication of 1-by-4 MMI Power Splitter for Optical Communication