Abstract:SiC nanowires are excellent high-temperature electromagnetic wave (EMW) absorbing materials. However, their polymer matrix composites are difficult to work at temperatures above 300°C, while their ceramic matrix composites must be prepared above 1000°C in an inert atmosphere. Thus, for addressing the abovementioned problems, SiC/low-melting-point glass composites were well designed and prepared at 580°C in an air atmosphere. Based on the X-ray diffraction results, SiC nanowires were not oxidized during air atmosphere sintering because of the low sintering temperature. Additionally, SiC nanowires were uniformly distributed in the glass matrix material. The composites exhibited good mechanical and EMW absorption properties. As the filling ratio of SiC nanowires increased from 5wt% to 20wt%, the Vickers hardness and flexural strength of the composite reached HV 564 and 213 MPa, which were improved by 27.7% and 72.8%, respectively, compared with the low-melting-point glass. Meanwhile, the dielectric loss and EMW absorption ability of SiC nanowires at 8.2–12.4 GHz were also gradually improved. The dielectric loss ability of low-melting-point glass was close to 0. However, when the filling ratio of SiC nanowires was 20wt%, the composite showed a minimum reflection loss (RL) of −20.2 dB and an effective absorption (RL ≤ −10 dB) bandwidth of 2.3 GHz at an absorber layer thickness of 2.3 mm. The synergistic effect of polarization loss and conductivity loss in SiC nanowires was responsible for this improvement.

Preparation and dielectric properties of SiC nanowires self-sacrificially templated by carbonated bacterial cellulose

In Situ Formation of the TiCN Phase in SiBCN Ceramic Aerogels Enabling Superior Thermal and Structural Stability Up to 1800 °C.

In-situ growth of SiC nanowire arrays on carbon fibers and their microwave absorption properties

Molten-salt-mediated synthesis of SiC nanowires for microwave absorption applications

Preparation of SiC Nanowire/Carbon Fiber Composites with Enhanced Electromagnetic Wave Absorption Performance

Tuning the morphologies of SiC nanowires via the control of growth temperature, and their photoluminescence properties.

In-situ synthesis of SiC nanowires on biomass carbon materials derived from cherry stones

Electromagnetic wave absorption and mechanical properties of SiC nanowire/low-melting-point glass composites sintered at 580°C in air

Synthesis and Characterization of SiC Nanowires Using Silicon Evaporation

Prism-shaped SiC nanowhiskers

Continuous Preparation of SiC Nanowires Using Fluidized Bed Chemical Vapor Deposition Method

Thermal Conductivity of SiC Microwires: Effect of Temperature and Structural Domain Size Uncovered by 0 K Limit Phonon Scattering

Synthesis and wave absorption characterization of SiC nanowires/expanded graphite composites

Preparation and Mechanical Behaviors of SiOC-modified Carbon-Bonded Carbon Fiber Composite with In-Situ Growth of Three-Dimensional SiC Nanowires

Synthesis and characterization of silicon carbide whisker arrays prepared by thermal evaporation method

High temperature stable, amorphous SiBCN microwave absorption ceramics with tunable carbon structures derived from divinylbenzene crosslinked hyperbranched polyborosilazane

Preparation and mechanical behaviors of multiscale SiC nanowires/carbon fiber reinforced silicon oxycarbide ceramic composites

Synthesis of One-Dimensional SiC Nanostructures from a Glassy Buckypaper.

In-situ synthesis and microstructural evolution of a SiC reinforced Al-50Si composite exhibiting exceptional thermal properties

Preparation of Silicon Carbide Nanowires and Nanochains Using Chemical Vapor Deposition Method