Abstract:Compared with conventional power transformer, power electronic transformer (PET) has many merits and an increasing possibility to replace it in the future. In this paper, the unbalanced-load correction capability of two H-bridge based three-phase three-stage modular PET topologies, the separate-phase-connection (SPC) one and the cross-phase-connection (CPC) one, are analyzed and compared. Both of the SPC and CPC consist of three stages: a modular multilevel ac-dc input stage, an isolation stage with several independent modular dual active bridge (DAB) dc-dc converters, and a dc-ac output stage with single-phase-inverter parallel-connected structure. Based on the control strategy, it is found that the SPC is suitable for dealing with full-range unbalanced load under the condition of increasing the input-stage current stress. For the SPC feeding, one load or three loads with identical power polarity, the current stress shall be theoretically increased up to 115% of the rated one, while the percentage is 153% when the SPC feeds three loads with different power polarity. On the contrary, the CPC is only suitable for dealing with partial unbalanced-load conditions. Extendedly, the third so-called full-range-power auto-balance PET is proposed to deal with unbalanced load, the performance of which is verified by simulation results. A downscaled prototype for SPC and CPC is built and tested. Experimental results verify the unbalanced-load correction performance of SPC and CPC.

Comparison on unbalanced-load handling capability of two power electronic transformer topologies

Research on Unbalanced-Load Correction Capability of Two Power Electronic Transformer Topologies

Comparison of several modular multi-output power electronic transformer topologies on unbalanced load compensation capability

Comparison of four power electronic transformer topologies on unbalanced load correction capacity

Study of a Single-stage Three-phase PFC DC/DC Converter With Series-parallel Connected Transforms

Control and Experiment of an H-Bridge Based Three-Phase Three-Stage Modular Power Electronic Transformer

Comparison of different IGBT based designs of power electronic transformer

Research on Power Electronic Transformer Based on Three-level Topology

Voltage balancing strategy discussion on modular multilevel DC/DC converter

Study on the New Topology of Power Electronic Transformer

A Three-Stage Power Electronic Transformer with Time-Sharing H-Bridges

Modeling and Analysis of Power Imbalance for Power Electronics Transformers with Multi-Bus Structure

Research of Different Modulation Methods for Single-Phase Single-Stage AC/AC Converter

A power electronic transformer (PET) with multiport bidirectional resonant DC-DC converters for electric traction applications

Power Electronic Transformer Using Multi-Pulse Rectification Technique

Review of power electronic transformer topologies applied to distribution system

Analysis And Comparison Of High Power Bidirectional Isolated Dc/Dc Converters For Power Electronic Transformer

Research of the voltage and current sharing issue of an H-bridge based power electronic transformer

Control of a Three-Stage Three-Phase Cascaded Modular Power Electronic Transformer

Review of topology and control application of medium and high voltage power electronic transformer

Pet Applicable To 3-Phase Medium-Voltage Ac Grid With Dc Bus Self-Balancing Capacity