Abstract:Compared with conventional power transformer, power electronic transformer (PET) has many merits and an increasing possibility to replace it in the future. In this paper, the unbalanced-load correction capability of two H-bridge based three-phase three-stage modular PET topologies, the separate-phase-connection (SPC) one and the cross-phase-connection (CPC) one, are analyzed and compared. Both of the SPC and CPC consist of three stages: a modular multilevel ac-dc input stage, an isolation stage with several independent modular dual active bridge (DAB) dc-dc converters, and a dc-ac output stage with single-phase-inverter parallel-connected structure. Based on the control strategy, it is found that the SPC is suitable for dealing with full-range unbalanced load under the condition of increasing the input-stage current stress. For the SPC feeding, one load or three loads with identical power polarity, the current stress shall be theoretically increased up to 115% of the rated one, while the percentage is 153% when the SPC feeds three loads with different power polarity. On the contrary, the CPC is only suitable for dealing with partial unbalanced-load conditions. Extendedly, the third so-called full-range-power auto-balance PET is proposed to deal with unbalanced load, the performance of which is verified by simulation results. A downscaled prototype for SPC and CPC is built and tested. Experimental results verify the unbalanced-load correction performance of SPC and CPC.

Pet Applicable To 3-Phase Medium-Voltage Ac Grid With Dc Bus Self-Balancing Capacity

Power Electronic Transformer Using Multi-Pulse Rectification Technique

Power Electronic Transformer for Dc Power Distribution Network

An Effective Power Electronic Transformer Applied to Distribution System

A power electronic transformer (PET) with multiport bidirectional resonant DC-DC converters for electric traction applications

Multi‐port medium‐frequency PET topology for integrating photovoltaic generation with battery storage

Resonant power electronic transformer for power grid

Design and Implementation of Four-Port Megawatt-Level High-Frequency-Bus Based Power Electronic Transformer

A Novel Three-Stage Power Electronic Transformer for AC/DC Conversion

DC Voltage Control Strategy of Three-Terminal Medium-Voltage Power Electronic Transformer-Based Soft Normally Open Points

A Novel PET Topology Using Voltage Source Converter and Direct AC-AC Choppers Based on Medium-Frequency Isolation

Review of power electronic transformer topologies applied to distribution system

Research on Power Electronic Transformer Based on Three-level Topology

Review of topology and control application of medium and high voltage power electronic transformer

Control Strategies of a Multiport Power Electronic Transformer (PET) for DC Distribution Applications

Modeling and Control of a Multiport Power Electronic Transformer (PET) for Electric Traction Applications

Research on Dynamic Voltage Characteristics of AC/DC Hybrid System Based on PET

DAB‐based PET in MVDC Traction and Shipboard Applications with Distribution and Redundant Control

Comprehensive Control Strategy and Robust Operation for Input Series Output Parallel Power Electronics Transformers in MVDC Grids

Research on Unbalanced-Load Correction Capability of Two Power Electronic Transformer Topologies

A Three-Port Power Electronic Transformer Based on Magnetic Integration