Abstract:The dynamic temperature data of a transformer can be utilized to accurately assess its load capability and operational longevity. This paper presents a study on the temperature rise characteristics of hot-spots in dry-type transformer windings and develops a extrapolative computational model based on various load rates, utilizing the results of transformer temperature rise tests. Firstly, the dynamic temperature rise characteristics of B-phase low-voltage (LV) winding and high-voltage (HV) winding hot-spot, along with its correlation calculation model with varying load rates, were determined based on the results of temperature rise tests. Subsequently, an extrapolative computational model for the temperature rise of the winding hot-spot, utilizing a three-section continuous load application approach, was proposed employing the lumped parameter method. The validity of this model was confirmed through verification. Lastly, a temperature rise test was conducted on another dry-type transformer to validate the universality of the model. Finally, a different dry-type transformer is chosen, and a temperature rise test is conducted to confirm the general applicability of the model. The results indicate that the calculation model for the hot-spot temperature rise of the winding under three consecutive loads is associated with the dynamic temperature rise pattern of the hot-spot of the winding between the temperature rise test with a small load rate and the temperature rise test with a large load rate. The maximum deviation between the hot-spot temperature rise test of the winding of SCB14-800/10-NX2 transformer and the results of the steady-state temperature rise value calculation is only 1.3 K, with a maximum error of the time constant value of the temperature rise being only 0.05 h. Similarly, the maximum deviation of the steady-state temperature rise value obtained from the hot-spot temperature rise test and the extrapolative computation of SCB-1250kVA/10 kV transformer winding is only 2.03 K, with a maximum error of the temperature rise time constant value being only 0.09 h. The extrapolative computational model proposed in this study conducts the temperature rise test under a small load rate instead of a large load rate, addressing the industry challenge of the challenging implementation of transformer on-site temperature rise tests and high power loss. This approach enhances inspection efficiency.

Economic and safe operation of parallel transformer considering hottest-spot temperature

On the use of Real-Time transformer temperature estimation for improving transformer operational tripping Schemes

Power Transformer On-Load Capacity-Regulating Control and Optimization Based on Load Forecasting and Hesitant Fuzzy Control

Overload Strategy of Transmission and Transformation Equipment for Safety Operation

A Two-Stage Overload Strategy of Oil-Immersed Transformers Considering Operation Risk

Research on Over-temperature Online Rapid Early Warning Methods of Oil-immersed Transformer under the Condition of Three-Phase Unbalance

Investigating temperature rise dynamics at hot-spots within dry-Type transformer windings: A comparative analysis across varied loading rates and an extrapolative computational model

Electromagnetic Field Analysis and Optimization Method of High-Temperature Superconducting Transformer under the Influence of Abnormal Voltage

Test and Analysis on Extended Temperature Rise of 110 kV Transformer Based on Distributed Temperature Sensing

ANALYSIS OF ELECTROMAGNETIC FIELDS AND EDDY CURRENT LOSSES IN LARGE POWER TRANSFORMERS

Calculation and research of hotspot temperature analysis of converter transformer

Evaluation model of transformer overload capacity considering multi-factors

Short-term Capacity Increasing Decision Method for Oil-immersed Transformer Considering Comprehensive Risk

Overheating Risk Warning Model based on Thermal Circuit Model and Load Forecasting for Distribution Transformers

Winding Hottest-Spot Temperature Analysis in Dry-Type Transformer Using Numerical Simulation

Simulation calculation of fluid field- thermal field of oil-immersed transformer and optimization of winding structure parameters

Analysis of Fine Fault Electrothermal Characteristics of Converter Transformer Reduced-Scale Model

An Estimation Method for Real-Time Thermal Capacity of Traction Transformers Under Unbalanced Loads

An Opportunity Cost Based Replacement Strategy for Transformers

Transformer design and application considerations for nonsinusoidal load currents