Abstract:Amorphous hydrous ruthenium oxide/active carbon (RuO2. xH(2)O/C) powders were prepared by a simple procedure based on the sol-gel process. The precursor was obtained by mixing an aqueous solution of RuCl3 and active carbon powders at pH 7. When annealing the precursor at 150 degreesC for 7-9.5 h, the RuO2. xH(2)O/C powders obtained had the highest specific capacitance. Transmission electron microscopy photographs showed that the RuO2. xH(2)O primary particles were about 10-15 nm diam. They adhered to form large porous secondary particles. A modeling capacitor was made with electrodes comprised of RuO2. xH(2)O/C powder and 30% H2SO4 electrolyte. At 10-20 wt % ruthenium in the electrodes, the specific capacitance remained almost unchanged at 243 F/g, which included both the electric double-layer capacitance associated with the high surface area of active carbon and redox capacitance associated with ruthenium oxide. About 52% of the RuO2 in the RuO2. xH(2)O/C powders was utilized. More than 50% of the capacitance in the electrode with 12.1% ruthenium was due to the formation of the double layer, but for the electrode with 21.1% ruthenium, the capacitance attributed to the double layer dropped to 16.8% of the total capacitance. When the electrodes contained ruthenium from 35 wt % to pure RuO2. xH(2)O, the specific capacitance increased from 350 to 715 F/g. The specific capacitance was proportional to the mass of the ruthenium in the electrodes. This enabled the specific capacitance to be controlled by changing the mass ratio of RuCl3 to active carbon in the preparation. Physical properties of the material and electrochemical characteristics of electrodes are also reported along with the capacitor performance. (C) 2001 The Electrochemical Society.

Fabrication and Supercapacitive Properties of a Thick Electrode of Carbon Nanotube–ruo2 Core–shell Hybrid Material with a High RuO2 Loading

Zeolitic Imidazolate Framework Derived ZnCo2O4 Hollow Tubular Nanofibers for Long-Life Supercapacitors

Activation Mechanism Study of Dandelion-Like Co9s8 Nanotubes in Supercapacitors

Rational Design of High-Surface-area Carbon Nanotube/microporous Carbon Core-Shell Nanocomposites for Supercapacitor Electrodes.

Enhanced rate performance of mesoporous Co(3)O(4) nanosheet supercapacitor electrodes by hydrous RuO(2) nanoparticle decoration.

Development of Supercapacitors Based on Carbon Nanotubes

Carbon Nanotube Capacitor Materials Loaded with Different Amounts of Ruthenium Oxide

Supercapacitive Properties Of Hydrous Ruthenium Oxide/Multi-Walled Carbon Nanotubes Nanocomposite

Enhanced Electrochemical Performance of Hydrous RuO2/mesoporous Carbon Nanocomposites Via Nitrogen Doping.

Supercapacitor electrode materials of nanostructured hydrous ruthenium oxide deposited by cyclic voltammetry method

Hydrothermal Synthesis of CuO/RuO2/MWCNT Nanocomposites with Morphological Variants for High Efficient Supercapacitors

Design and fabrication of a RuO2 microelectrode-based micro-supercapacitor

Preparation and Electrochemical Capacitance of RuO2/TiO2 Nanotubes Composites

Nano ruthenium oxide/carbon nanotubes composite electrode material for electrochemical capacitors

Core-shell structured carbon nanotubes/N-doped carbon layer nanocomposites for supercapacitor electrodes

Nickel–cobalt hydroxide nanoflakes conformal coating on carbon nanotubes as a supercapacitive material with high-rate capability

Synthesis of Ru/carbon nanocomposites by polyol process for electrochemical supercapacitor electrodes

Preparation And Electrochemistry Of Hydrous Ruthenium Oxide/Active Carbon Electrode Materials For Supercapacitor

Conformal Coatings of NiCo2O4 Nanoparticles and Nanosheets on Carbon Nanotubes for Supercapacitor Electrodes

Enhancing supercapacitor performance using nanosheet-covered nanotube structures Co 3 S 4 /Ni 0.96 S@CNTs with carbon nanotubes as conductive substrates

Super-capacitive Properties of Thick RuO 2 ·xH 2 O Electrodes:Effect of Thickness,Binder and Carbon Black Addition