Abstract:The ITER magnet system uses cable-in-conduit conductor (CICC) technology with individual strands twisted in several stages resulting in a rope-type cable, which is inserted into a stainless steel conduit. The combination of high current (up to 68 kA) and background magnetic field (up to 13 T) results in large transverse Lorentz forces exerted on the conductors during magnet system operation. The high transverse forces, accompanied with the cyclic nature of the load, have a strong influence on the conductor properties. The Twente Cryogenic Cable Press is used to simulate the effect of the Lorentz forces on a conductor comparable to the ITER magnet operating conditions. An overview is presented of the AC coupling and hysteresis loss, mechanical deformation characteristics and inter-strand contact resistance measurement results obtained on full-size ITER CICCs measured in the Twente Cryogenic Cable Press. The aim of this work is to characterize conductors' electromagnetic and mechanical properties during cycling of the load up to 30 000 cycles. The evolution of the magnetization (AC coupling loss time constant nτ), mechanical properties and inter-strand resistance R c between selected strands is presented along with loading history. The R c between first triplet strands is also measured as a function of applied load. It is shown that transverse load cycling has a strong influence on the CICC properties. An overview of the results for eight toroidal field conductors, two central solenoid conductors, three poloidal field conductors of different types (PF1&6, PF4, PF5), one main bus-bar and one correction coil conductor is presented.

Mechanical tensile test of the full-size ITER TF conductor jacket materials at 4.2 K

Mechanical test on the ITER TF jacket

Mechanical Test on the Iter Cc and Feeder Jacket

Fatigue tests on the ITER PF jacket

Study on fabrication of ITER TF conductor

Mechanical Properties of ITER CICC Jacket in China

Hot Helium Leak Test of ITER Blanket Shield Block

Manufacturing and testing of ITER FW CuCrZr/316L(N)-IG explosive Bi-metallic plates

Evaluation of the Mechanical Properties of CICC Jacket for CFETR Superconducting Magnet

Characterization of Ductile Nano-Tic Dispersed V4Cr4Ti/RAFMs Solid Diffusion Joint for Nuclear Fusion Reactor Application

A new enclosed method for transverse mechanical testing on CICC conductors

Research on Nondestructive Examination of Jacket Section for CFETR TF Coil

Mechanical and physical properties of modified N50 steel at cryogenic temperatures

Conductor Performance of TFCN4 and TFCN5 Samples for ITER TF Coils

The Research on High-Strength CICC Jackets with YS > 1500 MPa at 4.2 K for Future Fusion Applications

Research on Mechanical Properties of High-Performance Cable-in-conduit Conductors with Different Design

Investigation of the Mechanical Properties of N50H Jacket for CFETR High-Temperature Superconducting Application

Manufacture and Acceptance Test of the Full Size ITER PF5 Conductor Sample

Non-destructive Examination on PF Butt Welds of ITER Superconducting Conductor

Manufacturing of the ITER TF Conductors in China

Overview of verification tests on AC loss, contact resistance and mechanical properties of ITER conductors with transverse loading up to 30 000 cycles