Abstract:The China Fusion Engineering Test Reactor (CFETR) is a new tokamak fusion reactor under preliminary design, where the toroidal field (TF) coil has been designed to create a magnetic field of over 14.3 T. The TF conductors need to operate stably at 14.3 T, requiring the exclusion of conductor performance degradation from thermal and electromagnetic loading as much as possible. The maximum Lorentz force will reach about 1200 kN m(-1), which is much higher than that of ITER conductors. In previous research, performance degradation was found during electromagnetic cycles and warm-up-cool-down cycles. A correlation was found between a conductor's degradation and its mechanical properties. According to the analysis, a conductor with a short twist pitch (STP) scheme or a copper wound superconducting strand (CWS) design has large stiffness, which enables significant performance improvement in terms of the electromagnetic and thermal load cycling. The cable stiffness is closely related to the number of inter-strand contact points inside the conductor. Based on this concept, four types of prototype cable-in-conduit conductor samples with STP and CWS design were manufactured. The number of inter-strand contact points was analyzed, and mechanical transverse load testing was performed at 77 K. The results show that the conductors with more contact points per unit length exhibit a higher stiffness. However, the cable designed with high cable stiffness caused strand indentation, which was also investigated. In this paper, the conductor design and experimental results are discussed and compared with ITER TF and central solenoid conductors.

Evaluation of the Mechanical Properties of CICC Jacket for CFETR Superconducting Magnet

Mechanical Properties Evaluation of ReBCO CICC Jacket Based on Super-Austenitic Stainless Steel for CFETR High-Field Magnet

Investigation of the Mechanical Properties of N50H Jacket for CFETR High-Temperature Superconducting Application

Mechanical Properties of ITER CICC Jacket in China

The Research on High-Strength CICC Jackets with YS > 1500 MPa at 4.2 K for Future Fusion Applications

Mechanical Test on the Iter Cc and Feeder Jacket

Structure Optimization and Performance Evaluation of CS CICC Jacket Based on N50H Austenitic Steel for Future Fusion Reactor

Mechanical test on the ITER TF jacket

Study on the Welding Properties of Modified N50 CICC Jacket for Future Fusion Applications

Research On The Mechanical Properties Of Jacket Used For Bi-2212 Cable-In-Conduit Conductor

Research on Nondestructive Examination of Jacket Section for CFETR TF Coil

Research on CICC Jacket Material for High Field Magnet Application

Electromagnetic, stress and thermal analysis of the Superconducting Magnet

A new enclosed method for transverse mechanical testing on CICC conductors

Fatigue tests on the ITER PF jacket

Mechanical tensile test of the full-size ITER TF conductor jacket materials at 4.2 K

Mechanical and physical properties of modified N50 steel at cryogenic temperatures

Research on Mechanical Properties of High-Performance Cable-in-conduit Conductors with Different Design

Evaluation of localized mechanical properties of modified N50 welded joints at cryogenic temperature through a digital image correlation technique

Structural Design and Mechanical Analysis of HTS CICC Made From Twisted Stack Slotted-Core Cable

Mechanical and Electrical Properties of a CFETR CSMC Conductor under Transverse Mechanical Loadings