Abstract:Hydrogen is regarded as the next-generation energy carriers for the future hydrogen economy. 1 Among the hydrogen production technologies, proton exchange membrane (PEM) water electrolyzers is considered the favored approach for the implementation of the global hydrogen energy transformation due to its several benefits including high power density operation, low ohmic losses and differential pressure operation. However, (i) high cost mainly from the high platinum group metals (PGM) loading in the catalysts layers; (ii) low durability due to instability of the catalysts layers and membrane; and (iii) poor safety because of hydrogen crossover of PEM water electrolyzers have jeopardized their widespread commercialization. Currently, a new Department of Energy Consortium (H2NEW) has targeted hydrogen production from electrolysis, especially PEM water electrolysis, for use as a clean, sustainable fuel, which can achieve $2/kg hydrogen production cost by 2025. 2 This requires a balance between the performance, durability and scale-up cost of membrane electrode assemblies (MEAs) for PEM water electrolyzers. In this work, we demonstrate the capability to fabricate large scale MEAs by the unique Reactive Spray Deposition Technology (RSDT), that have one order of magnitude lower PGM loadings in the catalyst layer than the state-of-the-art (SOA) designs, and activity and durability performance comparable to the SOA commercial MEAs. RSDT is a flame-based method that combines the catalysts synthesis and electrodes deposition processes into one step and thus substantially reduces the time and cost for their fabrication. 3–5 The RSDT fabricated MEA with 680 cm 2 geometric area electrodes, and loadings of 0.2 mg Pt /cm 2 in the cathode and 0.3 mg Ir /cm 2 in the anode has been tested at current density of 1.8 A cm -2 , 50 o C, and 400 psi differential hydrogen pressure. The initial steady-state test for over 250 hours, clearly shows excellent activity and stability. In addition, the RSDT fabricated MEA has integrated dual recombination layers that effectively reduce the hydrogen crossover to below 10 %LFL at all current densities from 0.58 to 1.8 A/cm 2 . Reference 1. M. Carmo, D. L. Fritz, J. Mergel, and D. Stolten, Int. J. Hydrogen Energy, 38, 4901–4934 (2013). 2. https://www.energy.gov/sites/default/files/2021-09/h2-shot-summit-panel1-lte-status.pdf 3. H. Yu et al., Appl. Catal. B Environ., 239, 133–146 (2018) https://doi.org/10.1016/j.apcatb.2018.07.064. 4. H. Yu et al., Electrochim. Acta, 247, 1155–1168 (2017) http://dx.doi.org/10.1016/j.electacta.2017.07.093. 5. G. Mirshekari et al., Int. J. Hydrogen Energy, 46, 1526–1539 (2021) https://doi.org/10.1016/j.ijhydene.2020.10.112.

Sensitivity Study Of Process Parameters In Membrane Electrode Assembly Preparation And So2 Depolarized Electrolysis

Study on in-situ electrochemical impedance spectroscopy measurement of anodic reaction in SO 2 depolarized electrolysis process

Study on Electrochemical Synthesis of Succinic Acid Electrolysis Process with Membrane Method

SO2-depolarized Electrolysis Using Porous Graphite Felt As Diffusion Layer in Proton Exchange Membrane Electrolyzer

Study on Electrochemical Impedance Spectroscopy and Cell Voltage Composition of a Pem So2-Depolarized Electrolyzer Using Graphite Felt As Diffusion Layer

Comparison of Various Structure Designs of SO2-depolarized Electrolysis Cell

Quantitative Analysis of the Cell Voltage of So2-Depolarized Electrolysis in Hybrid Sulfur Process

Performance Improvement of the Liquid-Fed SO2-depolarized Electrolyzers for Anolyte with High H2SO4 Concentration

A gas permeable membrane electrode for selective and durable H2S production from SO2

Spectroscopy electrochemical impedance characterization of membranes electrode assemblies for PEM electrolyzers

Comprehensive study and optimization of membrane electrode assembly structural composition in proton exchange membrane water electrolyzer

Pt-based Bimetallic Catalysts for SO2-depolarized Electrolysis Reaction in the Hybrid Sulfur Process

Application of Pt Loaded Graphite Felt in SO2-depolarized Electrolyzer

Influence and Improvement of Membrane Electrode Assembly Fabrication Methods for Proton Exchange Membrane Water Electrolysis

Novel Analytic Method of Membrane Electrode Assembly Parameters for Fuel Cell Consistency Evaluation by Micro-Current Excitation

Study on a Novel Manufacturing Process of Membrane Electrode Assemblies for Solid Polymer Electrolyte Water Electrolysis

Membrane electrode assembly simulation of anion exchange membrane water electrolysis

Electrochemical processes for simultaneous sulfur and energy recoveries from sulfide-containing wastewater

Understanding and resolving the heterogeneous degradation of anion exchange membrane water electrolysis for large-scale hydrogen production

(Digital Presentation) Diagnostic Study of the Key Performance-Limiting Factors in Anion Exchange Membrane Fuel Cells

(Digital Presentation) Large–Scale High-Performance Low Catalyst Loaded Membrane Electrode Assemblies for Advanced Proton Exchange Membrane Water Electrolyzers