Abstract:Sulfur hexafluoride (SF6) gas, widely used in high-voltage circuit breakers, has a high global warming potential and hence substitutes are being sought. The use of a mixture of carbon tetrafluoride (CF4) and SF6 is examined here. It is known that this reduces the breakdown voltage at room temperature. However, the electrical breakdown in a circuit breaker after arc interruption occurs in a hot gas environment, with a complicated species composition because of the occurrence of dissociation and other reactions. The likelihood of breakdown depends on the electron interactions with all these species. The critical reduced electric field strength (the field at which breakdown can occur, relative to the number density) of hot SF6/CF4 mixtures corresponding to the dielectric recovery phase of a high voltage circuit breaker is calculated in the temperature range from 300K to 3500 K. The equilibrium compositions of hot SF6/CF4 mixtures under different mixing fractions were determined based on Gibbs free energy minimization. Full sets of improved cross sections for interactions between electrons and the species present are presented. The critical reduced electric field strength of these mixtures was obtained by balancing electron generation and loss mechanisms. These were evaluated using the electron energy distribution function derived from the Boltzmann transport equation under the two-term approximation. The result indicates that critical electric field strength decreases with increasing heavy-particle temperature from 1500 to 3500 K. Good agreement was found between calculations for pure hot SF6 and pure hot CF4 and experimental results and previous calculations. The addition of CF4 to SF6 was found to increase the critical reduced electric field strength for temperatures above 1500 K, indicating the potential of replacing SF6 by SF6/CF4 mixtures in high-voltage circuit breakers. (C) 2013 AIP Publishing LLC.

Analysis of the Dielectric Breakdown Characteristics for a 252-Kv Gas Circuit Breaker

Breakdown Electric Field Calculation of Hot SF6 and Its Application to High Voltage Circuit Breakers

Investigation on Critical Breakdown Electric Field of Hot Carbon Dioxide for Gas Circuit Breaker Applications

Pressure Measurement and Characteristic Analysis on a 252-Kv Puffer-Type SF $_{6}$ Circuit Breaker

Influence of PTFE Vapor on Dielectric Breakdown Property of Hot SF6 Gas

Interruption Characteristic of 3%C5F10O/97%CO2 Gas Mixture in a 40.5kV Circuit Breaker

Study on Breakdown Characteristics and Attenuation Characteristics of Air Mixed Gas

Study of the Arc Interruption Performance of CO2 Gas in High-Voltage Circuit Breaker

Experiment Researches on Cold State Dielectric Recovery Characteristics in High Voltage SF6 Circuit Breakers

Analysis of Breaking Characteristics of C4F7N/CO2 Mixture Gas in Circuit Breaker

Study on the Dielectric Recovery Performance of High Voltage SF6 Circuit Breaker

Study of the Dielectric Breakdown Properties of Hot SF6–CF4 Mixtures at 0.01–1.6 MPa

Investigation of dielectric breakdown properties of sf 6 – n 2 and sf 6 – cf 4 mixtures at 0 . 4 mpa and gas temperatures up to 3000

Investigation on Critical Breakdown Electric Field of Hot Sulfur Hexafluoride/Carbon Tetrafluoride Mixtures for High Voltage Circuit Breaker Applications

Dynamic Dielectric Strength of C 3 F 7 CN/CO 2 and C 3 F 7 CN/N 2 Gas Mixtures in High Voltage Circuit Breakers

Dielectric Breakdown Properties of SF6–N2 Mixtures in the Temperature Range 300–3000 K

Researches on dielectric recovery characteristics of CO<inf>2</inf> gas-blast arc chamber under no-load breaking

Dielectric Breakdown Properties of Hot SF6gas Contaminated by Copper at Temperatures of 300–3500 K

Dielectric Breakdown Properties of Hot Sf6/He Mixtures Predicted from Basic Data

Numerical Simulation of Gas Flow During Arcing Process for 252 Kv Puffer Circuit Breakers

Influence of Copper Contamination on Dielectric Breakdown Properties of High-Temperature Sf6 Gas Based on Boltzmann Equation Analysis