Analysis of Breaking Characteristics of C4F7N/CO2 Mixture Gas in Circuit Breaker

Xiaolong Li,Lei Liu,Wen Wang,Zhenxin Geng
DOI: https://doi.org/10.3390/en17112638
IF: 3.2
2024-05-30
Energies
Abstract:In recent years, the C4F7N mixed gas has attracted considerable attention for its outstanding insulation and arc-extinguishing capabilities, positioning it as a potential substitute for sulfur hexafluoride, SF6. However, there remains a limited understanding of the arc-extinguishing and insulation performance of C4F7N/CO2 mixed gas. In addition, there is limited research on high-current breaking in circuit breakers. Therefore, this study aims to investigate the arc characteristics and breaking behavior of 10%C4F7N/90%CO2 and 15%C4F7N/85%CO2 mixed gases using a magnetohydrodynamic model based on the 252kV air pressure circuit breaker. The dynamic characteristics of this mixed gas are compared with pure SF6 under short-circuit current breaking conditions, while analyzing different parameters of the C4F7N configuration. The results indicate that the mixed gas exhibits lower levels in terms of arc temperature, axial diffusion distance and pressure difference at the moment of arc initiation compared to pure SF6. Furthermore, increasing the inflating pressure can effectively enhance the breaking performance of the circuit breaker with 0.6 MPa, making it more suitable. Additionally, increasing the proportion of C4F7N in the mixed gases will cause the arc temperature to rise slightly at the initial arc and current crossing zero, but decrease at the peak current. The core pressure also rises significantly, with a greater pressure difference established in the compressor at moment of arc initiation. This study provides a reference for the design of an environmentally friendly circuit breaker and the selection of the mixed gas ratio.
energy & fuels
What problem does this paper attempt to address?
The paper primarily investigates the interruption characteristics of C4F7N/CO2 gas mixtures in circuit breakers. Specifically, the research aims to address the following key issues: 1. **Evaluating the performance of C4F7N/CO2 gas mixtures as an alternative to SF6**: Given the restrictions on SF6 due to its significant greenhouse effect, finding environmentally friendly alternatives has become an important task for the power industry. C4F7N, as a gas with good insulation properties and a lower greenhouse effect, is considered a potential substitute for SF6. 2. **Comparing the dynamic characteristics of C4F7N/CO2 gas mixtures with pure SF6 under short-circuit current interruption conditions**: By using a magnetohydrodynamic model, simulations are conducted for 10%C4F7N/90%CO2 and 15%C4F7N/85%CO2 mixtures, and the arc characteristics and interruption behavior of these gas mixtures in a 252kV gas circuit breaker are compared with those of pure SF6. 3. **Exploring the impact of different parameters (such as inflation pressure, C4F7N proportion) on the interruption performance of the gas mixture**: The study finds that increasing the inflation pressure can effectively enhance the interrupting performance of the circuit breaker; increasing the proportion of C4F7N slightly raises the arc temperature at the initial stage of the arc, but lowers the temperature at the peak current. In summary, the goal of the research is to provide a reference for the design of environmentally friendly circuit breakers and the selection of gas mixture ratios based on an understanding of the interruption mechanism of C4F7N/CO2 gas mixtures. Through comparative analysis, the paper offers valuable insights into the performance evaluation of C4F7N/CO2 gas mixtures as an environmentally friendly alternative.