Abstract:Monocrystalline silicon solar cells with photo-absorbing morphology can amplify light-trapping properties within the absorber layer and help to fabricate cost-effective solar cells. In this paper, the effect of different parameters namely temperature and time of Cu-assisted chemical etching was thoroughly investigated for the optimization of the light absorption properties. P-type monocrystalline wafers were selectively treated with Cu(NO3)2.3H2O:HF:H2O2:DI water solution at 50 °C for five different time duration. The entire process was repeated at five different temperatures for 20min as well to study the relation between etching temperature and surface reflectance. Sonication bathing was used for the removal of the deposited Cu atoms from the surface with the variation of time and the effect was examined using energy dispersive spectroscopy (EDS). Field emission scanning electron microscopy (FESEM) and UV/VIS spectroscopy were conducted to study the surface morphology and light absorbance respectively. Inverted shapes almost similar to inverted pyramids or porous surface were found randomly on the surface of the wafer. The effect of temperature was found more significant compared to the effect of time variation. An optimum light reflectance was found at 50 °C for 20 min of texturization. Atomic force microscopy (AFM) of the textured sample revealed the average depth of pyramidal shape was about 1.58 μm. EDS results showed a proportional relation between time and Cu removal process, and a complete Cu atoms free textured surface after 25 min of sonication bathing. Therefore, a suitable Cu-assisted texturization technique was found, which could enable lowering the photo-reflectance below 1% without any antireflection coating.

Fabrication of ultra-small texture arrays on multicrystalline silicon surface for solar cell application

Constructing Submicron Textures on Mc-Si Solar Cells Via Copper-Catalyzed Chemical Etching

Formation of Nanostructured Emitter for Silicon Solar Cells Using Catalytic Silver Nanoparticles

Improvement of conversion efficiency of multicrystalline silicon solar cells by incorporating reactive ion etching texturing

Research of Texturization on Multi-crystalline Silicon Surface for Solar Cell

A Metal-Free Additive Texturization Method Used for Diamond-Wire-sawn Multi-Crystalline Silicon Wafers

Acid Texturing of Large Area Multi-Crystalline Silicon Wafers for Solar Cell Fabrication

Nano-Texturing of Single Crystalline Silicon Via Cu-Catalyzed Chemical Etching

High-Efficient Solar Cells Textured by Cu/Ag-Cocatalyzed Chemical Etching on Diamond Wire Sawing Multicrystalline Silicon

The Modulation of Surface Texture for Single-Crystalline Si Solar Cells Using Calibrated Silver Nanoparticles As a Catalyst

An Innovative Light Trapping Structure Fabrication Method on Diamond-Wire-Sawing Multi-Crystalline Silicon Wafers

Effect of Additives on Making Texture Surface on Multicrystalline Silicon Wafer by Diamond Wire Sawing

A simple method to produce dual-scale silicon surfaces for solar cells

A high efficiency industrial polysilicon solar cell with a honeycomb-like surface fabricated by wet etching using a photoresist mask

Ultrafast Random‐Pyramid Texturing for Efficient Monocrystalline Silicon Solar Cells

Fabrication of Ultra-Low Antireflection SiNWs Arrays from Mc-Si Using One Step MACE

A Simple Texturization Approach for Mono-Crystalline Silicon Solar Cell with Low Tmah Concentration Solution

Study and analysis the Cu nanoparticle assisted texturization forming low reflective silicon surface for solar cell application

Fabrication of High Voltage GaAs Micro-Solar Cell Arrays

Research on Surface Nano-Texturation and Wet-Chemical Passivation of Multi-Crystalline Silicon Wafer

Antireflection Properties and Solar Cell Application of Silicon Nanostructures