Abstract:The cavity receiver's thermal conversion performance is critical for parabolic dish and tower Concentrated Solar Power (CSP) systems. Distinct from precedent research aiming to increase the receiver's absorption through cavity geometry optimization, the objective of this work was to investigate the thermal conversion performance of a novel, positive conical cavity receiver design, following the heat loss reduction approach with simplified pipe forming, to stress the effectiveness of this approach in cavity receiver design, and to provide data for future optimization of the proposed design. To accomplish these goals, the novel receiver and existing designs' heat flux absorption and heat loss are compared numerically. The resulting conversion power is also experimentally validated. The concept is inspired by analysis of formulas, suggesting the novel design may realize a thermal conversion improvement of 8.6%, at 650 K, and increases with the rise in temperature. The comprehensive numerical investigation combines ray tracing of identical incoming radiation to investigate the receiver absorption and CFD methods to investigate the cavities' heat loss at identical temperatures. The absorption acquired is unoptimized. The novel design can reduce the heat loss by as much as 91.8% when compared with a negative conical design at 650 K, resulting in a 12.3% improvement in conversion power. The experimental investigation measures the energy conversion to the working fluid in different cavities under identical incoming radiation. The novel receiver outperforms by over 5.6% in the setup. After correcting boundary conditions using experiment measurements, the experimental and numerical results are comparable. This research proves that the novel positive conical receiver has a better thermal conversion performance over 650 K; thus, the heat loss reduction approach is effective and feasible in receiver designs within this temperature range.

Optical efficiency analysis of cylindrical cavity receiver with bottom surface convex

Experimental Investigation of Thermal Performance Enhancement of Cavity Receiver with Bottom Surface Interior Convex

The Numerical Investigation on Optical Efficiency and Heat Flux Distribution of Conical Cavity Receiver

PROPOSAL OF THE SHAPE LAYOUT OF TRAPEZOIDAL CAVITY RECEIVER TO IMPROVE THE OPTICAL EFFICIENCY

Simulation of Optical Performance for a Solar Cavity Receiver Arranged with Spiral Tubes

An experimental investigation on thermal and optical analysis of cylindrical and conical cavity copper tube receivers design for solar dish concentrator

Heat Loss Reduction Approach in Cavity Receiver Design Based on Performance Investigation of a Novel Positive Conical Scheme

Design and Optimization of Elliptical Cavity Tube Receivers in the Parabolic Trough Solar Collector

Radiation Performance of Dish Solar Concentrator/Cavity Receiver Systems

ANALYSIS AND OPTIMIZATION OF TRIANGULAR CAVITY RECEIVER IN PARABOLIC TROUGH COLLECTOR

Optical performance enhancement of solar flux distribution uniformity of solar parabolic dish cavity system

Theoretical and Experimental Analysis on Efficiency Factors and Heat Removal Factors of Fresnel Lens Solar Collector Using Different Cavity Receivers

Study On Trough Receiver For Linear Concentrating Solar Collector

An optimized model and test of the China’s first high temperature parabolic trough solar receiver

Numerical Study on Thermal Performance of a Solar Cavity Receiver with Different Depths

Parametric analysis of small scale cavity receiver with optimum shape for solar powered closed Brayton cycle applications

Radiative Properties of A Solar Cavity Receiver/Reactor with Quartz Window

Solar-thermal conversion investigation using surface partition method for a cavity receiver with helical pipe

Thermal performance analysis of a novel Conical-Cylindrical-Conical cavity receiver for a Scheffler concentrated solar system

Performance Investigation on a Linear Fresnel Lens Solar Collector Using Cavity Receiver

Numerical Investigation on Uniformity of Heat Flux for Semi-Gray Surfaces Inside a Solar Cavity Receiver