Abstract:A series of FeMnTiOx mixed oxides catalysts, which were synthesized by a CTAB-assisted co-precipitation process and calcined at different temperatures, were investigated for selective catalytic reduction of NO with NH3 in the presence of excess O-2. The samples were characterized by means of N-2-physisorption, XRD, TEM, H-2-TPR, XPS, NH3-TPD, and in situ DRIFTS technologies. The results indicated that the activities of samples were not predominately determined by BET specific surface area. Compared with amorphous TiO2, the anatase TiO2 crystalline phase was more conducive to enhance the electron interaction between manganese species and support: Mn4+ + Ti3+ <-> Mn3+ + Ti4+center dot NH3 was easier to be activated on the surface of samples which had lower binding energy of lattice oxygen in selective catalytic reduction of NO with NH3. The addition of CAB not only promoted the formation of anatase TiO2 crystalline phase and Lewis acid sites, but also improved the dispersion extent of active phase on the surface of samples. Thus, it enhanced the catalytic performance of samples. In addition, calcination temperature had an important influence on the valence state of manganese species, as well as the dispersion extent of active phase and the crystal phase structure of support. The sample calcined at 4000 degrees C showed excellent low-temperature activity and mid-temperature N-2 selectivity. The NO conversion and N-2 selectivity of this sample were above 90% in the range of 150-350 degrees C at a space velocity of 30,000 mL g(-1) h(-1). Furthermore, it exhibited sulfur tolerance and water resistance to a certain extent. (C) 2015 Elsevier B.V. All rights reserved.

Influence of WO3 doping on properties of MnOx/TiO2 catalyst for low-temperature selective catalytic reduction of NOx by NH3

Catalytic performance of MnO 2-CeO 2/Ti 0.25Zr 0.25Al 0.5O 1.75 monolith catalyst for low temperature selective catalytic reduction of NO with NH 3

Catalytic performance of MnO_x/WO_3/TiO_2 catalyst for low-temperature selective catalytic reduction of NO_x by NH_3

WO_3 Modification of MnO_x /tio_2 Catalysts for Low Temperature Selective Catalytic Reduction of NO with Ammonia

Influence of WO3 doping on properties of V2O5/TiO2-SnO2catalysts for selective catalytic reduction of NOx by NH3

WO3 modification on MnOx/TiO2 low-temperature De-NOx SCR catalyst

Influence of WO3 Doping on Properties of V2O5/TiO2-ZrO2 Catalysts for Selective Catalytic Reduction of NOx by NH3

Preparation and catalytic performance of MnO/TiO2-ZrO2 catalysts used for the selective catalytic reduction of NO at low temperature

Improved activity of W-modified MnO –TiO2 catalysts for the selective catalytic reduction of NO with NH3

Preparation of MnOx/TiO2 catalyst and catalytic performance for selective catalytic reduction of NO with NH3 at low temperature

Synthesis, Characterization and Catalytic Performance of Femntiox Mixed Oxides Catalyst Prepared by A Ctab-Assisted Process for Mid-Low Temperature Nh3-Scr

Investigation and Characterization on MnO_x/TiO_2 for Low-Temperature Selective Catalytic Reduction of NO_x with NH_3

MnOx/TiO2 catalysts prepared by ultrasonic impregnation for low temperature selective catalytic reduction of NO

The Role of NH_3 in the Low-Temperature Selective Catalytic Reduction of NO over MnO_x/TiO_2

Activity enhancement of WO<sub>3</sub> modified FeTiO<sub>x</sub> catalysts for the selective catalytic reduction of NO<sub>x</sub> by NH<sub>3</sub>

The role of NH3 in the low-temperature selective catalytic reduction of NO over MnOx/TiO2

Insights into the Highly Efficient Co Modified MnSm/Ti Catalyst for Selective Catalytic Reduction of NOx with NH3 at Low Temperature

Activity enhancement of WO3 modified FeTiO catalysts for the selective catalytic reduction of NO by NH3

Influence of Ca doping on MnO x /TiO 2 catalysts for low-temperature selective catalytic reduction of NO x by NH 3

Effect of Fe reduced-modification on TiO2 supported Fe–Mn catalyst for NO removal by NH3 at low temperature

Effect of Fe Reduced-Modification on TiO 2 Supported Fe–Mn Catalyst for NO Removal by NH 3 at Low Temperature