Abstract:This study focuses on the microstructure evolution of non-oriented silicon steel for the drive motor iron core of new energy vehicles. The Fe-3.0% Si non-oriented silicon steel hot-rolled bands were taken as the research objects and were normalized at 700, 800 and 900 °C for 3 and 10 min. The influence of low-temperature normalization process on the microstructure, texture and mechanical properties was studied. The results show that the bands normalized at 700 and 800 °C inherit the gradient microstructure and texture characteristics of the initial hot-rolled band. The surface layer consists of homogeneous and fine recrystallized grains, the central layer consists of elongated deformed grains with γ-fiber and α-fiber textures and the subsurface layer has mixed grain structure with strong Goss texture. When the normalizing temperature is increased to 900 °C, the normalized band is completely recrystallized, and the gradient structure and texture are significantly weakened. During the normalizing process, the θ-fiber oriented grains in the subsurface mainly nucleate at the grain boundaries of the α*-fiber and //ND matrix grains, and the //ND oriented grains mainly nucleate at the grain boundaries of Goss and {110} deformed matrix grains. The θ-fiber oriented grains in the central layer mainly nucleate at the grain boundaries of {001} , γ-fiber and {114} matrix grains, the α-fiber oriented grains nucleate in the {111} and α-fiber deformed matrix grains, the nucleation of α*-fiber grains is related to the α-fiber deformed matrix grains. After normalizing at 900 °C, θ-fiber and α*-fiber grains have growth advantages, resulting in strong θ-fiber and α*-fiber textures. As the normalizing temperature increases, the gradient structure of the normalized microstructure is gradually weakened, thus leading to the decrease in plastic deformation ability.

Study on Microstructure and Precipitates at Different Normalizing in Fe-3.15%Si Low Temperature Oriented Silicon Steel

Effect of normalizing cooling process on microstructure and precipitates in low-temperature silicon steel

Effect of Normalizing Treatment on Microstructure and Mechanical Properties of Non-oriented Fe-3.0% Si Steel

Roles of Silicon Content and Normalization Temperature on Cold Workability and Recrystallization of High-Grade Non-Oriented Silicon Steel

Effect of Normalizing Temperature on Microstructure and Properties of Low-Carbon and Low-Silicon Non-oriented Silicon Steel Prepared by TSCR Process

The Influence of Hot Rolling Technological Parameters on Microstructure of Low Temperature Grain-Oriented Silicon Steel

Effect of normalizing on magnetic properties of high-manganese 50W470 non-oriented silicon steel

EFFECT OF COLD ROLLING PROCESS ON TEXTURE EVOLUTION OF GRADIENT MICROSTRUCTURE IN Fe-3,0 % Si NON-ORIENTED SILICON STEEL

Effect of Grain Size Before Cold Rolling on Microstructure, Texture and Magnetic Properties of Ultra-Thin Low-Si Non-oriented Silicon Steel

Effect of Normalization Process on the Microstructure and Properties of Annealed Cold-Rolled Sheet of Oriented Silicon Steel

Development of microstructure and texture in strip casting grain oriented silicon steel

Coordinate regulation mechanism of primary recrystallization texture and microstructure of grain-oriented silicon steel

Effect of Normalizing on Microstructure and Texture of Non-Oriented Electrical Steel with 1.6% Silicon

Effect of recrystallization annealing temperature on microstructure, texture and magnetic properties of non-oriented silicon steel produced by strip casting

Microstructure and texture evolution of ultra-thin grain-oriented silicon steel sheet fabricated using strip casting and three-stage cold rolling method

Influence Mechanisms of Cold Rolling Reduction Rate on Microstructure, Texture and Magnetic Properties of Non-Oriented Silicon Steel

The effect of Nb content on precipitates, microstructure and texture of grain oriented silicon steel

Ultra‐Thin 3.5%Si Steel with Both Magnetic Properties and Mechanical Properties Produced by Different Process Routes of Large‐Scale Production

Investigation of microstructure and texture as related to primary recrystallization of grain-oriented silicon steel

Effects of Two-Stage Cold Rolling Schedule on Microstructure and Texture Evolution of Strip Casting Grain-Oriented Silicon Steel with Extra-Low Carbon

Effect of Cold Rolling Process on Microstructure, Texture and Properties of Strip Cast Fe-2.6%Si Steel