Abstract:Statement of Problem A mesiodistal angle frequently forms between 2 splinted implant-supported, screw-retained fixed dental prostheses (TIS-FDPs). Mechanical complications commonly occur in prosthetic screws. Studies regarding the effect of the degree of implant angulation on the biomechanical performance of prosthetic screws in TIS-FDPs are sparse. Purpose The purpose of this numerical and experimental study was to investigate the effects of different implant angulations on the biomechanical performance, including stress distribution, stability of the screw joint, and surface morphology change of the prosthetic screws in TIS-FDPs. Material and methods TIS-FDPs were classified into 4 groups: 0, 10, 20, and 30 degrees based on the degree of mesiodistal angle between the long axes of the 2 implants. In the finite element analysis (FEA), 4 series of 3D models were constructed and loaded with simulated occlusal forces. The von Mises stresses and rotational angles of the prosthetic screws were then calculated. In the mechanical test, each group of 5 TIS-FDPs with 10 prosthetic screws was tested under 1 million loading cycles by using a universal testing machine. The removal torque values (RTVs) and the surface roughness of the prosthetic screws were measured after cyclic loading. The normality of the outcome variables was assessed by the Shapiro-Wilk test. Analysis of variance and the Kruskal-Wallis test were used for further analysis (α=.05). Results The FEA results showed that the von Mises stresses of the prosthetic screws were concentrated in the first screw thread crest engaged with the abutment, and the maximum values of the threads and the rotation angles of the prosthetic screws increased in the 2-implant mesiodistal angulation from 0 to 30 degrees. The mechanical tests showed that the RTVs of the prosthetic screws in each group were not significantly different after 1 million loading cycles ( P = .107). The surface roughness of the crest of the first 2 threads of the prosthetic screws in the 30-degree group changed significantly compared with those in the other groups. Conclusions When TIS-FDPs were delivered, larger angulations of the 2 splinted implants seemed to increase the stress concentrated on the crest of the first engaged thread and the rotation angles of the prosthetic screws. After 1 million loading cycles, significant surface adhesive wear was identified on the crest of the first 2 threads of the prosthetic screws in the 30-degree group compared with groups with a smaller angulation.

Effect of Placement Angle on the Stability of Loaded Titanium Microscrews in Beagle Jaws.

Influence of various implanting angles of micro-implants on peak stress in peri-implant surface

Experimental Study of the Stability of Microscrew Anchorage Implants in Distal Movement of Teeth

Evaluation of the surface characteristics of anodic oxidized miniscrews and their impact on biomechanical stability: An experimental study in beagle dogs

Effect of different implant angulations on the biomechanical performance of prosthetic screws in two implant-supported, screw-retained prostheses: A numerical and experimental study

Bicortical Microimplant with 2 Anchorage Heads for Mesial Movement of Posterior Tooth in the Beagle Dog

Effects of exposure length, cortical and trabecular bone contact areas on primary stability of infrazygomatic crest mini-screws at different insertion angles

The Influence of Micro-Implant Insertion Angle on the Stability of Micro-Implant

Research of the Stability about Home- Made Titanium Microscrew Implants in Different Loading Time Points

Effect of Loading Angles on Abutment Screw Loosening: In Vitro Study

[Stability of Upper Molars with the Application of Implant Anchorage].

[Stress Distribution in Press-Fit Orthodontic Microimplant Bone Interface].

The effect of implant shape and screw pitch on microdamage in mandibular bone.

A Study on the Stability of Miniscrew on Different Loading Time As Orthodontic Anchorage

The Effect of Varying Healing Times on Orthodontic Mini-Implant Stability: a Microscopic Computerized Tomographic and Biomechanical Analysis.

Experimental Study of Microsrew Implants As Anchorage in Intrusion of Teeth

[Effect of Bicortical Orthodontic Microimplant on Tooth Movement in Dogs].

Investigation of the Effect of Abutment Angle Tolerance on the Stress Created in the Fixture and Screw in Dental Implants Using Finite Element Analysis

Comparative study of stress characteristics around the adjacent teeth tissues during insertion of mini-screws with different insertion angles: A three-dimensional finite element study

A New Method to Evaluate the Positional Stability of a Self-Drilling Miniscrew.

Comparison of mechanical stability of mini-screws with resorbable blasting media and micro-arc oxidation surface treatments under orthodontic forces: An in vitro biomechanical study