Abstract:Robotic fiber placement systems, which have larger workspaces, better dexterity, and easier installations, are less expensive alternatives to the conventional fiber placement machines. To overcome the disadvantage of poor path accuracy, sensor-based path correction can be implemented online by reference to the edge of a previously deposited tow or a guide line on the tooling surface. In fiber placement operations, the end-effector with a compaction roller, acting like a unicycle on the surface, is subject to the nonholonomic constraints when moving along a predefined path to provide proper guidance and pressure for the tows. If the constraints are ignored in path correction, the corrective motion with a lateral velocity component will result in improper tow guidance that induces undesired and uncontrolled tow steering, leading to deviations and wrinkles. In this paper, the nonholonomic constraints of the robot end point is discussed for the first time in online path correction, and a novel method is proposed under the constraints to achieve online path correction without damaging lay-up quality. The path correction problem is analyzed and simplified using twist decomposition. Then the instantaneous motion of the roller is derived by modified vector pursuit algorithm. Afterwards, an iterative algorithm is proposed based on screw theory and differential kinematics for consecutive external control of correction in robot joint space. The implementation of the method is tentatively explored by applying visual sensing based on directional light source and external control to a robotic fiber placement system. Simulations and experiments have showed that the large initial path deviations can be effectively reduced and the roller motions along the corrected paths satisfy the nonholonomic constraints.

Variable-Angle Trajectory Planning Algorithm for Automated Fiber Placement of Two Non-developable Surfaces

Variable-Angles Trajectory Planning Algorithm of Automated Fiber Placement for Conical Shell

Algorithms for Constructing Initial and Offset Path of Automated Fiber Placement for Complex Double-Curved Surfaces

Smooth Joint Motion Planning for Redundant Fiber Placement Manipulator Based on Improved RRT*

Two-Stage Sector Partition Path Planning Method For Automated Fiber Placement On Complex Surfaces

A Path Planning Algorithm of Closed Surface for Fiber Placement

Trajectory Planning of Multi-Robot Coordination Platform for Locating Large Subassembly.

Online Path Correction under End Point Nonholonomic Constraints – Implementation with Visual Sensing in Robotic Fiber Placement

An Improved Path Discretization Method for Automated Fiber Placement

Mechanism for Wrapping Fiber Around the Y Fork

An Efficient and Adaptable Path Planning Algorithm for Automated Fiber Placement Based on Meshing and Multi Guidelines

Robotic Trajectory Planning for Non-Destructive Testing Based on Surface 3D Point Cloud Data

Path Planning Algorithm for Fiber Placement Based on Boundaries of Tow

Adaptive Path Planning of Fiber Placement Based on Improved Method of Mesh Dynamic Representation

Path Planning and Optimization Algorithm for Fiber Placement of S-shaped Inlet

Non-retraction toolpath generation for irregular compound freeform surfaces with the LKH TSP solver

Research on fiber placement machine and path planning methodology

Post Processing Technology for Fiber Placement Machine of Manipulator Terminal Motion Trajectory

An algorithm for trajectory planning of complex surface parts for laser cladding remanufacturing

Motion Planning for Industrial Robots Based on Task Process Decomposition

Type Synthesis and Trajectory Planning of 5-DOF Redundantly Actuated Parallel Robots with Large Output Rotational Angles for Large Workpieces