Abstract:Robotic fiber placement systems, which have larger workspaces, better dexterity, and easier installations, are less expensive alternatives to the conventional fiber placement machines. To overcome the disadvantage of poor path accuracy, sensor-based path correction can be implemented online by reference to the edge of a previously deposited tow or a guide line on the tooling surface. In fiber placement operations, the end-effector with a compaction roller, acting like a unicycle on the surface, is subject to the nonholonomic constraints when moving along a predefined path to provide proper guidance and pressure for the tows. If the constraints are ignored in path correction, the corrective motion with a lateral velocity component will result in improper tow guidance that induces undesired and uncontrolled tow steering, leading to deviations and wrinkles. In this paper, the nonholonomic constraints of the robot end point is discussed for the first time in online path correction, and a novel method is proposed under the constraints to achieve online path correction without damaging lay-up quality. The path correction problem is analyzed and simplified using twist decomposition. Then the instantaneous motion of the roller is derived by modified vector pursuit algorithm. Afterwards, an iterative algorithm is proposed based on screw theory and differential kinematics for consecutive external control of correction in robot joint space. The implementation of the method is tentatively explored by applying visual sensing based on directional light source and external control to a robotic fiber placement system. Simulations and experiments have showed that the large initial path deviations can be effectively reduced and the roller motions along the corrected paths satisfy the nonholonomic constraints.

Quaternion-based Placement Orientation Trajectory Smoothing Method under the Domain of Admissible Orientation

Multi-orientation trajectory smoothing planning of robot for dental implant

Build Orientation Optimization for Extrusion-Based Additive Manufacturing Coupling with Adaptive Slicing

Determination and application of posture adjustable domain under constraints of placement quality

Build Orientation Optimization Based on Weighted Analysis of Local Surface Region Curvature

Collisionless Tool Orientation Smoothing above Blade Stream Surface Using NURBS Envelope

Tool Orientation Sequence Smoothing Method Based on the Discrete Domain of Feasible Orientations

Smooth Joint Motion Planning for Redundant Fiber Placement Manipulator Based on Improved RRT*

Smooth Orientation Planner for Manipulators Based on Quaternion and B-spline

Two-Stage Sector Partition Path Planning Method For Automated Fiber Placement On Complex Surfaces

An Improved Path Discretization Method for Automated Fiber Placement

Continuous Stiffness Optimization of Mobile Robot in Automated Fiber Placement

Algorithms for Constructing Initial and Offset Path of Automated Fiber Placement for Complex Double-Curved Surfaces

Trajectory Planning of Multi-Robot Coordination Platform for Locating Large Subassembly.

Modeling and Compensation of Volumetric Errors for a Six-Axis Automated Fiber Placement Machine Based on Screw Theory

Online Path Correction under End Point Nonholonomic Constraints – Implementation with Visual Sensing in Robotic Fiber Placement

Measurement, Identification, and Compensation of Pose Errors for Six-Axis Gantry Automated Fiber Placement Machine

Modeling of Tension Control System with Passive Dancer Roll for Automated Fiber Placement

Trajectory optimization for automated tape placement on triangular mesh surfaces considering gap requirements

Trajectory Planning of Robot End-Effector Position and Orientation Based on Cubic Spline

Smoothness-optimal trajectory planning method with constraint on traveling time for manipulators