Abstract:The development of the telescope with large aperture is driven by the increasing demand for higher imaging resolution and imaging area. The large membrane diffraction space telescope is particularly attractive due to their lightweight nature, ease of folding and unfolding, and high precision imaging capabilities. However, the flexible and large structure of these telescope makes them prone to long-time, low-frequency vibrations in space. These vibrations can degrade the imaging quality and potentially cause damage to the instrument in the space telescope. Therefore, it is crucial to develop effective active vibration control methods to suppress these structural vibrations. This paper proposes a control method that utilizes cables as actuators. Since cables can only withstand tension and have limited output tension, this constraint is taken into account during the control design process. Firstly, a dynamics model of the membrane diffraction space telescope with hinge flexibility is developed by the beam theory and finite element method. Next, an active controller is designed by combining H∞ control theory and Linear Matrix Inequalities (LMI). Additionally, the optimal positions of cable actuators are determined using the Gram controllability criterion and a particle swarm algorithm. Finally, the effectiveness of the control method is verified through numerical simulations. The simulation results demonstrate that the hinge flexibility significantly influences the structural vibration behavior of the telescope. Furthermore, the proposed control method demonstrates the ability to effectively suppress the vibrations of the telescope while also exhibiting robustness to changes in natural frequencies of the structure.

Vibration characteristics of the feed support system in radio telescope

Self-Excited Vibration Analysis For The Feed Support System In Fast

Research on Redress System of Vibration Table in Multi-Parameter Combined Environment Test System

Test Study of the Feed-Support System for a Large Radio Telescope

Dynamic Control Simulation of Stewart Platform with Flexible Suspension

Dynamic modeling and wind vibration control of the feed support system in FAST

Simulation and experimental analysis of the Stewart parallel mechanism for vibration control

Dynamic analysis of a feed fine-tuning test platform for the large radio telescope

Research on the Dynamic Coupling of the Rigid-Flexible Manipulator

Experimental Study and Theoretic Analysis of the Structure for Supporting the Feed Cabin of the FAST

Terminal Accuracy of the Feed Support System in FAST

Design of a Maglev Stewart Platform for the Microgravity Vibration Isolation

The Multi-Body System Modelling of the Gough–Stewart Platform for Vibration Control

Design of the Servo System of the Fine Turning Platform of FAST

Optimization of Cable Tensions of a Cable-Driven Parallel Manipulator for a Large Radio Telescope

Analysis and design of 3T cable-driven parallel manipulator for the feedback’s orientation of the large radio telescope

Active Vibration Control of a Large Space Telescope Based On H∞ Control With Unilateral and Constrained Input

Dynamic modeling of the Stewart platform for the NanShan Radio Telescope

On Vibration Control with Stewart Parallel Mechanism

Research on longitudinal vibration characteristic of the six-cable-driven parallel manipulator in FAST

Feedback Control of a Cable-Driven Gough-Stewart Platform.