Abstract:The development of the telescope with large aperture is driven by the increasing demand for higher imaging resolution and imaging area. The large membrane diffraction space telescope is particularly attractive due to their lightweight nature, ease of folding and unfolding, and high precision imaging capabilities. However, the flexible and large structure of these telescope makes them prone to long-time, low-frequency vibrations in space. These vibrations can degrade the imaging quality and potentially cause damage to the instrument in the space telescope. Therefore, it is crucial to develop effective active vibration control methods to suppress these structural vibrations. This paper proposes a control method that utilizes cables as actuators. Since cables can only withstand tension and have limited output tension, this constraint is taken into account during the control design process. Firstly, a dynamics model of the membrane diffraction space telescope with hinge flexibility is developed by the beam theory and finite element method. Next, an active controller is designed by combining H∞ control theory and Linear Matrix Inequalities (LMI). Additionally, the optimal positions of cable actuators are determined using the Gram controllability criterion and a particle swarm algorithm. Finally, the effectiveness of the control method is verified through numerical simulations. The simulation results demonstrate that the hinge flexibility significantly influences the structural vibration behavior of the telescope. Furthermore, the proposed control method demonstrates the ability to effectively suppress the vibrations of the telescope while also exhibiting robustness to changes in natural frequencies of the structure.

Test Study of the Feed-Support System for a Large Radio Telescope

Feedback Control of a Cable-Driven Gough-Stewart Platform.

Vibration characteristics of the feed support system in radio telescope

Self-Excited Vibration Analysis For The Feed Support System In Fast

Research on the Modeling, Control, and Calibration Technology of a Tracked Vehicle Load Simulation Test Bench

Experimental Analysis of Rod-Cable Deployable Mast System

Experimental Study and Theoretic Analysis of the Structure for Supporting the Feed Cabin of the FAST

Dynamic analysis of a feed fine-tuning test platform for the large radio telescope

Terminal Accuracy of the Feed Support System in FAST

Simulation and experimental analysis of the Stewart parallel mechanism for vibration control

EXPERIMENTAL RESEARCH OF FIRST FEED-SUPPORT SYSTEM OF FAST

The Multi-Body System Modelling of the Gough–Stewart Platform for Vibration Control

Trajectory tracking control for large radio telescope source feed of l/30th model

Dynamic Control Simulation of Stewart Platform with Flexible Suspension

Six Degree of Freedom Active Isolation in Flexible Supporting Structures: Numerical Simulation and Experiment

Trajectory tracking control for large radio telescope source feed of 1/30th model

Optimization of Cable Tensions of a Cable-Driven Parallel Manipulator for a Large Radio Telescope

An Electromechanical Collaborative Simulation Platform for the Radio Receiver Supporting System of Large Telescope

Dynamic modeling and wind vibration control of the feed support system in FAST

Quantitative feedback controller design and test for an electro-hydraulic position control system in a large-scale reflecting telescope

Active Vibration Control of a Large Space Telescope Based On H∞ Control With Unilateral and Constrained Input