Abstract:The thermal stabilization process of polyacrylonitrile (PAN) precursor fiber was the key step to prepare high-performance carbon fiber. During the thermal stabilization process, the aggregation structure and the reactivity of molecular chains have significant effects on the microstructures and mechanical properties of carbon fiber. In the present paper, the effects of the orientation structure of PAN precursor fiber on the thermal stabilization reaction and the mechanical properties of carbon fiber were experimentally studied. Using multi-dimensional structural and mechanical properties tests, such as XRD, DSC, 13C NMR and Instron machine testing, the crystalline and skeleton structure, exothermic behavior, and tensile properties of PAN precursor fiber with different orientations in the process of thermal stabilization were characterized to reveal the relationship between microstructure evolution and tensile properties. The results showed that the orientation structure of PAN precursor fiber had an obvious effect on the thermal stabilization process and the tensile stress–strain characteristic. When the heat treatment temperature was lower than 200 °C, the crystallinity and crystallite size of PAN fibers with higher orientation degrees increased significantly. After sufficient thermal stabilization, the original PAN precursor fiber with a higher orientation degree could form more aromatic lamellar structures and showed better regularity. Furthermore, the yield strength and initial modulus of the fibers with a higher orientation degree increased due to the formation of more aromatic rings. The maximum increase in the percentages of yield strength and tensile modulus of the PAN fibers were achieved when the heat-treated temperature was 200 °C, and the percentage values were 138.4% and 158.7% compared to the precursor without heat-treatment. In addition, the elongation at break of the fibers with a higher orientation degree was also relatively larger.

Preparation and Characterization of a Novel Thiol-containing Fiber

Preparation of Polyacrylonitrile-Based Fibres with Chelated Ag Ions for Antibacterial Applications.

Preparation and Characterization of Polyaniline/Mmt Conductive Composites

Preparation and Characterization of Novel Poly[Cyclotriphosphazene-Co-(4,4 '-Sulfonyidiphenol)] Nanofiber Matrices

Preparation, Stabilization and Carbonization of a Novel Polyacrylonitrile-Based Carbon Fiber Precursor

Preparation, Characterization and Application of a Novel Silane-Bridged Polyaniline/cotton Fiber Composite

Comparative investigation on the thermal degradation and stabilization of carbon fiber precursors

The Preparation and Characterization of Polyacrylonitrile-Polyaniline (PAN/PANI) Fibers

Preparation and Characterization of Carbon/CNTs Hybrid Nanofibers Via a Simple Electrospinning Route

Structural Identification of Polyacrylonitrile During Thermal Treatment by Selective 13C Labeling and Solid-State 13C NMR Spectroscopy

Structural Transformation of Polyacrylonitrile (PAN) Fibers during Rapid Thermal Pretreatment in Nitrogen Atmosphere

Effect of Stretching on the Orientation Structure and Reaction Behavior of PAN Fiber During the Thermal Stabilization

Study on the Changes of Structures and Properties of PAN Fibers during the Cyclic Reaction in Supercritical Carbon Dioxide

SYNTHESIS AND CHARACTERISTICS OF POLYACRYLONITRILE (PAN) NANOFIBER MEMBRANE USING ELECTROSPINNING METHOD

Gel Spinning of Polyacrylonitrile Fibers with Medium Molecular Weight

Stabilization Kinetics of Gel Spun Polyacrylonitrile/lignin Blend Fiber

Preparation and Characterization of Polyaniline Micro/nanotubes with Dopant Acid Mordant Dark Yellow GG

In Situ Study and Improvement of the Temperature Increase and Isothermal Retention Stages in the Polyacrylonitrile (PAN) Fiber Pre-Oxidation Process

Effect of Polyacrylonitrile Precursor Orientation on the Structures and Properties of Thermally Stabilized Carbon Fiber

Polymer Concentration Adjustment for Homogeneous Carbon Nanofibers Precursors

Processing, Structure, and Properties of Lignin- and CNT-Incorporated Polyacrylonitrile-Based Carbon Fibers