Abstract:Poly(trimethylene terephthalate) (PTT) nanocomposites containing carbon nanotubes (CNTs) with different surface structure and aspect ratio were prepared by melt compounding for electrospinning. The dispersion state of the CNTs in the composites was then examined utilizing rheology tools. The results show that carboxylic surface functionalized CNTs present better dispersion in the matrix than hydroxy surface functionalized CNTs because the former has stronger affinity to the PTT. Besides surface functionalization, the aspect ratio of CNTs is also vital to their final dispersion. The CNTs with lower aspect ratio are dispersed as individuals or small bundles while those with higher aspect ratio are dispersed mainly as flocs with large hydrodynamic radius, showing higher effective volume fraction. The presence of CNTs has a large influence on the morphologies of electrospun fiber and on the appearances of CNTs in the fibers. In the presence of CNTs with lower aspect ratio, continuous composite fibers are obtained. But the structure of those continuous fibers highly depends on the surface group of CNTs. Carboxylic surface functionalized CNTs are well embedded by the PTT and oriented along the fiber axis during electrospinning, leading to bead-free and uniform fiber morphology; while hydroxy surface functionalized CNTs show tortuous conformations with less orientation in the fibers, and as a result, the obtained fibers show beaded and misshaped morphologies. In the case of higher aspect ratio, however, the CNTs prefer to exist as entanglements or knots in the streamlines, and thereby only beaded or even uncontinuous fibers are obtained. Therefore, the formation and fiber morphology of PTT/CNT composite fibers obtained by electrospinning strongly depend on the surface functional groups of the CNTs, as well as on the CNT structure.

Preparation and Characterization of Carbon/CNTs Hybrid Nanofibers Via a Simple Electrospinning Route

Preparation and Characterization of Highly Aligned Carbon Nanotubes/Polyacrylonitrile Composite Nanofibers

Preparation and Characterization of PAN-Based Carbon Nanofibers Non-Woven

Preparation of MWCNTs/PAN Composite Microspheres by Aqueous Deposition Polymerization and Their Electrospun Fibers

Preparation and Characterization of Carbon Nanofibers Containing Fe

Preparation and Properties of Carbon Nanotube/carbon Fiber Hybrid Reinforcement by a Two-Step Aryl Diazonium Reaction

Preparation of Silver-Plated Carbon Nanotubes/carbon Fiber Hybrid Fibers by Combining Freeze-Drying Deposition with a Sizing Process to Enhance the Mechanical Properties of Carbon Fiber Composites

Carbon Nanotube‐reinforced Polyacrylonitrile Nanofibers by Vibration‐electrospinning

Preparation, Morphology, and Mechanical Properties of Carbon Nanotube Anchored Polymer Nanofiber Composite

Titanium Carbide–Carbon Composite Nanofibers Prepared by Electrospinning Polyacrylonitrile

Electrospun Polyacrylonitrile Nanofibers Containing a High Concentration of Well-Aligned Multiwall Carbon Nanotubes

Preparation and Characterization of PAN Derived Activated Carbon Nanofibers with High Specific Surface Area via Electrospinning Technique

Fabrication and Characterization of Carbon Nanofibers with a Multiple Tubular Porous Structure Via Electrospinning

Polyacrylonitrile and Carbon Nanofibers with Controllable Nanoporous Structures by Electrospinning

Carbon nanofibers based carbon-carbon composite fibers

A Novel Continuous Carbon Nanotube Fiber/carbon Composite by Electrified Preform Heating Chemical Vapor Infiltration

Electrospinning of Poly(trimethylene Terephthalate)/carbon Nanotube Composites

Preparation of Carbon Nanotube/carbon Fiber Hybrid Fiber by Combining Electrophoretic Deposition and Sizing Process for Enhancing Interfacial Strength in Carbon Fiber Composites

Preparation of Continuous Carbon Nanotube Networks in Carbon Fiber/epoxy Composite

Preparation and Characterisation of PSA/CNT Composites and Fibres

Preparation and Characterization of Core—Shell Structured Nanofibers by Coaxial Electrospinning