Abstract:Highly oriented, large area continuous composite nanofiber sheets made from surface-oxidized multiwalled carbon nanotubes (MWNTs) and polyacrylonitrile (PAN) were successfully developed using electrospinning. The preferred orientation of surface-oxidized MWNTs along the fiber axis was determined with transmission electron microscopy and electron diffraction. The surface morphology and height profile of the composite nanofibers were also investigated using an atomic force microscope in tapping mode. For the first time, it was observed that the orientation of the carbon nanotubes within the nanofibers was much higher than that of the PAN polymer crystal matrix as detected by two-dimensional wide-angle X-ray diffraction experiments. This suggests that not only surface tension and jet elongation but also the slow relaxation of the carbon nanotubes in the nanofibers are determining factors in the orientation of carbon nanotubes. The extensive fine absorption structure detected via UV/vis spectroscopy indicated that charge-transfer complexes formed between the surface-oxidized nanotubes and negatively charged (-CN[triple bond]N:) functional groups in PAN during electrospinning, leading to a strong interfacial bonding between the nanotubes and surrounding polymer chains. As a result of the highly anisotropic orientation and the formation of complexes, the composite nanofiber sheets possessed enhanced electrical conductivity, mechanical properties, thermal deformation temperature, thermal stability, and dimensional stability. The electrical conductivity of the PAN/MWNT composite nanofibers containing 20 wt % nanotubes was enhanced to approximately 1 S/cm. The tensile modulus values of the compressed composite nanofiber sheets were improved significantly to 10.9 and 14.5 GPa along the fiber winding direction at the MWNT loading of 10 and 20 wt %, respectively. The thermal deformation temperature increased with increased MWNT loading. The thermal expansion coefficient of the composite nanofiber sheets was also reduced by more than an order of magnitude to 13 x 10(-6)/ degrees C along the axis of aligned nanofibers containing 20 wt % MWNTs.

Preparation of MWCNTs/PAN Composite Microspheres by Aqueous Deposition Polymerization and Their Electrospun Fibers

Functionalized carbon nanotube/polyacrylonitrile composite nanofibers: Fabrication and properties

Electrospun Polyacrylonitrile Nanofibers Containing a High Concentration of Well-Aligned Multiwall Carbon Nanotubes

Preparation and Characterization of Highly Aligned Carbon Nanotubes/Polyacrylonitrile Composite Nanofibers

Electrospinning and Microwave Absorption of Polyaniline/polyacrylonitrile/multiwalled Carbon Nanotubes Nanocomposite Fibers

Preparation and characterization of polyacrylonitrile (PAN)/TiO2 ultrafine fibers

The effects of carbon nano-tubes dispersed coagulation bath on the structure and performance of PAN based carbon fiber precursors

Prepartion and Properties of Poyacrylonitrile/multiwall Carbon Nanotube Fibers

Preparation and Characterization of PAN-Based Carbon Nanofibers Non-Woven

Preparation and Characterization of Carbon/CNTs Hybrid Nanofibers Via a Simple Electrospinning Route

Preparation of MWNTs/PVA/PEO composite fiber by electrospinning process

Multiwalled Carbon Nanotube/polyacrylonitrile Composite Fibers Prepared by in Situ Polymerization

Preparation of Cellulose Acetate-Polyacrylonitrile Composite Nanofibers by Multi-Fluid Mixing Electrospinning Method: Morphology, Wettability, and Mechanical Properties

Carbon nanofibers based carbon-carbon composite fibers

Structure and Morphological Evolvement of Electrospun Polyacrylonitrile/Organic–Modified Fe-Montmorillonite Composite Carbon Nanofibers

Assembly of Well-Aligned Multiwalled Carbon Nanotubes in Confined Polyacrylonitrile Environments: Electrospun Composite Nanofiber Sheets

Fabrication and Mechanical Properties of MWCNTs/PVC Electrospun Ultrafine Fibers

Preparation and characterization of electrospun Ag/polyacrylonitrile composite nanofibers

Modification of Precursor Polymer Using Co-Polymerization: A Good Way to High Performance Electrospun Carbon Nanofiber Bundles

Structure and Properties of Amid-CNT/PAN Composite Fibers by Wet Spinning Method

Electrospinning Fabrication of High Strength and Toughness Polyimide Nanofiber Membranes Containing Multiwalled Carbon Nanotubes