Abstract:An in-situ compatibilized starch (St) and polyacrylonitrile (PAN) composite spinning solution was designed by preparing starch-graft-polyacrylonitrile (St-g-PAN) through graft copolymerizing acrylonitrile from soluble starch and using ammonium cerium nitrate (CAN) as initiator. As dimethyl sulfoxide (DMSO) was used as the solvent, St/St-g-PAN/PAN/DMSO spinning solution was prepared and St/St-g-PAN/PAN composite fibers were obtained by dry-wet spinning technique. The effects of air gap, coagulation bath, hot drawing and stretching, and thermal-setting process were studied in detail. Fourier transform infrared spectroscopy (FT-IR), solid state nuclear magnetic resonance (13C NMR), thermogravimetric analysis (TGA), X-ray diffraction analysis (XRD), and scanning electron microscopy (SEM) were used to characterize the structure and morphology of the copolymer and the fibers. Single fiber strength tester and sonic orientation instrument were performed to measure the fiber mechanical properties and orientation degrees. The results showed that as the grafting ratio ~150.0% and the reacting mixture containing St ~9.8%, St-g-PAN ~81.6%, and homo-PAN ~8.6% in DMSO solution with 6.0 wt% in concentration were used, the spinning parameters such as air gap ~35 mm, coagulation bath concentration ~70%, temperature ~25 °C, and positive stretching ~48%, hot drawing and stretching 6 times at 80 °C, thermal-setting at 90 °C for 3 h under constant length mode were met, composite fibers with breaking strength 3.41 cN·dtex−1, breaking elongation 14.41%, sonic orientation factor 0.625, moisture recovery ratio 10.53% under standard condition (1 atm, 22 °C, and relative humidity 65%), and boiling water shrinkage ratio 9.60% were obtained. The as prepared composite fiber was better than common viscose fiber 2.11 cN·dtex−1 and cotton fiber ~3.24 cN·dtex−1 and expected to be used in the fields of medical gauze, bandage, protective clothing, et al. besides of common textiles. The in-situ compatibilization method can be applied in preparation of other composite polymer materials.

Gel Spinning of Polyacrylonitrile Fibers with Medium Molecular Weight

Pregelled Gel Spinning of Polyacrylonitrile Precursor Fiber

Study On The Spinnability In Gel Spinning Of Pan Precursor Fiber

Theory of Gelation and Gel Spinning of PAN Precursor

Gel Spinning of Polyacrylonitrile/Cellulose Nanocrystal Composite Fibers

Gelation of Polyacrylonitrile Solution

Non-Coagulant Spinning of High-Strength Fibers from Homоpolymer Polyacrylonitrile Synthesized via Anionic Polymerisation

Effects of Moisture Content and Heat Treatment on the Viscoelasticity and Gelation of Polyacrylonitrile/Dimethylsulfoxide Solutions

Fiber Spinning of Polyacrylonitrile Grafted Soy Protein in an Ionic Liquid/DMSO Mixture Solvent

Highly-efficient Fabrication and Crystallinity and Orientation of Polyacrylonitrile Nanofibers

Studies on Gel-spinning of Chitosan Dispersion Carbon Nano-tubes/polyacrylonitrile Composite Fibers

Microstructural Evolution during Dry-Jet Wet Spinning Postprocessing from Coagulation Bath Fiber to High-Performance Polyacrylonitrile Precursor Fiber

Gelation Behavior of Polyacrylonitrile Solution in Relation to Aging Process and Gel Concentration

Investigating the Spinnability in the Dry‐jet Wet Spinning of PAN Precursor Fiber

Preparation and Characterization of PAN-Based Carbon Nanofibers Non-Woven

Preparation and characterization of pan nanofiber via electrostatic spinning

Drawing dependent structures, mechanical properties and cyclization behaviors of polyacrylonitrile and polyacrylonitrile/carbon nanotube composite fibers prepared by plasticized spinning

Investigation into the Gelation and Crystallization of Polyacrylonitrile

Study On The Gelation Behavior Of Concentrated Polyacrylonitrile/Dimethyl Sulfoxide Solution

In-situ compatibilized starch/polyacylonitrile composite fiber fabricated via dry-wet spinning technique

Effects of Chemical Composition and Post-Spinning Stretching Process on the Morphological, Structural, and Thermo-Chemical Properties of Electrospun Polyacrylonitrile Copolymer Precursor Nanofibers