Abstract:Ni20Al30Fe intermetallic alloy was synthesized by laser powder deposition. Heat treatment experiments on the synthesized layer were conducted at different heat temperature and time to investigate the microstructure evolution. The results indicate that laser deposited Ni20Al30Fe intermetallic alloy consists of β phase and a few γ phase particles. The sizes of the crystal grains are within 30-50µm. After heat treatment at 650°C and 850°C, more γ phase precipitates in particle-shape and strip-shape within the crystal grains or along the crystal boundaries. With the increase of heat temperature and isothermal holding time, the sizes and amount of the γ phase increase. At the same time, the sub-crystal grains combine and grow, the sub-crystal boundaries disappear. The precipitation of the γ phase is favorable to the improvement of ductility of the Ni20Al30Fe intermetallic alloy. After heat treatment at 1050°C, recrystallization of the crystal grains occurs, which results in the refinement of the microstructure.Ni20Al30Fe intermetallic alloy was synthesized by laser powder deposition. Heat treatment experiments on the synthesized layer were conducted at different heat temperature and time to investigate the microstructure evolution. The results indicate that laser deposited Ni20Al30Fe intermetallic alloy consists of β phase and a few γ phase particles. The sizes of the crystal grains are within 30-50µm. After heat treatment at 650°C and 850°C, more γ phase precipitates in particle-shape and strip-shape within the crystal grains or along the crystal boundaries. With the increase of heat temperature and isothermal holding time, the sizes and amount of the γ phase increase. At the same time, the sub-crystal grains combine and grow, the sub-crystal boundaries disappear. The precipitation of the γ phase is favorable to the improvement of ductility of the Ni20Al30Fe intermetallic alloy. After heat treatment at 1050°C, recrystallization of the crystal grains occurs, which results in the refinement of the microstructure.

Phase Transformation Sequence of Mixed-Structural Electroless Ni-19.7at.% P Deposit

Structural Evolution of Topologically Closed Packed Phase in a Ni-based Single Crystal Superalloy

Minimum Interface Misfit Criterion for the Precipitation Morphologies of TCP Phases in a Ni-based Single Crystal Superalloy

P phase precipitation and strengthening behavior of a novel polycrystalline Ni 3 Al-based intermetallic alloy at 1100 °C

Early Precipitation of Ni-2(Cr,Mo) Phase

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Effects of Heat Treatments on Phase Structure of Electrodeposition Aluminum Coatings on Different Substrates

Influence of Heat Treatment on Microstructure of Laser Powder Deposited Ni20Al30Fe Intermetallic Alloy

Non-isothermal crystallization kinetics of amorphous electroless nickel-phosphorus alloy plating

Study On The Crystallization Process Of Ni-P Amorphous Alloy

Kinetics of crystallization of Ni3P phase from amorphous Ni–P powder alloy precursors for preparation of Ni3P-rich alloys

Structure and phase transformations of amorphous-nanocrystalline Al-based alloy

Relationship between the Crystallographic Structure of Electrodeposited Fe-P Alloy Film and its Thermal Equilibrium Phase Diagram

In-depth investigation of the evolution of microstructure and its influence on the mechanical properties of medium-phosphorus electroless nickel coatings after thermomechanical treatments

Effect of Heat Treatment on the Microstructure of Multiphase Nial-Based Alloy

Amorphous-to-Cu51Zr14phase Transformation in Cu60Ti20Zr20alloy

Short Study on Mechanism of Morphology Change of γ′ Precipitates in IN718 Plus

An In-Situ TEM Investigation on Microstructure Evolution of Ni-25 At.% Al Thin Films

Synthesis, Composition, Morphology, and Wettability of Electroless Ni-Fe-P Coatings with Varying Microstructures

Evolution of the phase structure after different heat treatments in NiCoFeCrGa high entropy alloy

DYNAMICS OF PRECIPITATION AND TRANSFORMATION OF CARBIDES IN A Ni-BASE SUPERALLOY