Abstract:Eutectic M7C3 carbides, enriched in Cr, Fe, and minor Mo and V, were observed at grain boundaries in coarse rod or island morphologies. Secondary M7C3 formed around these eutectic carbides, maintaining a similar composition and rod‐like shape. Nearby, M6C derived from Mo segregation precipitated in fan‐shaped clusters, facilitated by the dissolution of M7C3 and the conversion of M2C. The precipitation, growth, and transformation of carbides rich in Cr and Mo during solidification and cooling process of high‐alloy steel for cold working dies are investigated. The Fe–C pseudobinary phase diagram of high‐alloy steel is calculated by Thermo‐Calc software to ascertain the critical phase transformation temperatures. The temperatures of phase transformation during the solidification process are determined by a differential scanning calorimeter. Then the microstructure of the samples at these characteristic temperatures is observed in situ by high‐temperature confocal microscope. The results show that the characteristic temperatures for phase transformation and carbide precipitation are 1380, 1315, 1140, and 980 °C, respectively. At 1315 °C, thick rod‐like or island‐like M7C3 carbides enriched in Cr and Fe are formed. At 1140 °C, secondary M7C3, adhering to the primary eutectic M7C3, grows rapidly in a rod‐like morphology and maintains a similar composition. The secondary M6C carbides of segregated Mo elements precipitate in fan‐shaped clusters near M7C3 through the dissolution of M7C3 and the conversion of M2C. Thermodynamic calculation further indicates that the eutectic Cr7C3 precipitates at 1213 °C, and secondary Cr7C3 remains under conditions favorable for precipitation below the solidus, preceding the precipitation of secondary carbides Cr23C6 and Mo2C.

DYNAMICS OF PRECIPITATION AND TRANSFORMATION OF CARBIDES IN A Ni-BASE SUPERALLOY

B22-P-17Evolution of the MC Carbide in Nickel-base Single Crystal Superalloy Exposing at 950 °C

Site Preference of Metallic Elements in M23C6 Carbide in a Ni-based Single Crystal Superalloy

Influences of MCrAlY Coatings and TBCs on Oxidation Behavior of a Ni-Based Single Crystal Superalloy

Minimum Interface Misfit Criterion for the Precipitation Morphologies of TCP Phases in a Ni-based Single Crystal Superalloy

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Experimental Study and Computer Simulation on Multicomponent Diffusion in Multiphase Dispersions During Solid Carburizing of HP40Nb and KHR45A Alloys

Thermodynamic Simulation Calculation on Precipitation Behavior of Equilibrium Phases in a Low Re bearing Nickel based Single Crystal Superalloy

MC decomposition and boride formation in a next generation polycrystalline Ni based superalloy during isothermal exposure at 900 °C

Carbide Precipitation Behavior of High‐Alloy Steel During Solidification and Cooling Process

Thermodynamic Calculations of Solidification and Phases Precipitation Behavior of Ni-Fe Based Superalloys for Ultra-supercritical Power Plants

Strengthening of Ni-Mn-Cu-Al-Co steel by nanoscale Cu and β-NiAl co-precipitated couples

Thermal stability of carbides in a Ni-based single crystal superalloys

Co-Precipitation Behavior in Ferrite Region During Isothermal Process in Ti-Mo-Cu Microalloyed Steel

Quantitative precipitate classification and grain boundary property control in Co/Ni-base superalloys

Improved Thermodynamic Descriptions of Carbides in Ni-Based Superalloys

Hot deformation characteristics and dynamic recrystallization mechanisms of a Co–Ni-based superalloy

Hot Deformation Behavior and Recrystallization Mechanism in an As-Cast CoNi-Based Superalloy

Early Precipitation of Ni-2(Cr,Mo) Phase

Effect of cobalt on precipitation in Fe-Cr-Co-Mo-Ni-C stainless steels

Crystallography and morphology evolution of MC carbides in Ni-12Mo-7Cr-2 Nb based superalloy