Abstract:LiFePO4/C composite with high crystallinity, sub-micron particle size and suitable content of in-situ introduced Fe2P was synthesized by a sol-gel method, in which LiOH, Fe2C2O4 and NH4H2PO4 were used as starting materials, and ethylene glycol was used as complexing agent and carbon source. The precursor of LiFePO4 was calcined at a comparatively low temperature for relatively long time combined a following calcination at a comparatively high temperature for relatively short time. The composite shows high-rate capability as cathode material for lithium-ion batteries. The structure and the electrochemical properties of the LiFePO4/C composites synthesized by different calcination parameters were analyzed by X-ray diffraction, scanning electron microscopy, element analysis and electrochemical testing of galvanostatic charge-discharge, etc. The results show that the step-wise calcination at different temperatures for different times is an effective approach to obtain suitable amount of in-situ Fe2P, control the particle size and enhance the crystallinity of LiFePO4, which results in a significant improvement in the high-rate capability of LiFePO4. The LiFePO4/C composite synthesized at a calination temperature of 600℃ for 20 h followed by a further calcination at 700℃ for 4 h has 4wt% Fe2P and 3wt% C. The composite possesses discharge capacities of 140, 110 and 100 mAh/g at discharge rates of 1, 10 and 20 C, respectively.

Mesoporous Li2 FeSiO4/C as Cathode Material for Lithium Ion Battery

Synthesis And Electrochemical Properties Of Li2fesio4/C As Cathode Materials For Lithium-Ion Batteries

Olivine LiFePO4 Nanocrystallites Embedded in Carbon-Coating Matrix for High Power Li-ion Batteries

A Novel Synthesis and Characterization of LiFePO4 and LiFePO4/C As a Cathode Material for Lithium-Ion Battery

In-situ generation of Li 2 FeSiO 4 /C nanocomposite as cathode material for lithium ion battery

Inorganic-based Sol–gel Synthesis of Nano-Structured LiFePO 4 /C Composite Materials for Lithium Ion Batteries

Synthesis and Properties of Li2MnSiO4/C Cathode Materials for Li-ion Batteries

Electrochemical Performance of LiFePO 4 /(c+fe 2 P) Composite Cathode Material Synthesized by Sol-Gel Method

Hydrothermal Synthesis and Electrochemical Performance of Nanoparticle Li2FeSiO4/C Cathode Materials for Lithium Ion Batteries

Li 0.99 Ti 0.01 FePO 4 /C composite as cathode material for lithium ion battery

Preparation of 2% Sulfur Doped Li2fesio4/C with High Performance for Lithium Ion Batteries

Synergetic Effect of the Crystallinity, Particle Size of LiFePO4 and the In-Situ Introduced Fe2P on Its High-Rate Capability

Fe3O4/Fe/carbon Composite and Its Application As Anode Material for Lithium-Ion Batteries.

Li<sub>0.99</sub>Ti<sub>0.01</sub>FePO<sub>4</sub>/C composite as cathode material for lithium ion battery

Synthesis and electrochemical characterization of LiFePO4/C Cathode materials for Li-ion batteries

Multifunctional carbon-confined FeS nanoparticles for a self-supporting and high-capacity cathode in lithium ion battery

Carbon-coated Li3V2(PO4)(3) Composite Cathode Material for Lithium-Ion Batteries: Sol-gel Synthesis and Performance

Preparation and Electrochemical Properties of Carbon-Coated LiMn0.6Fe0.4PO4 Cathode Material for Lithium-Ion Batteries

Synthesis of LiFePO4/C Composite As a Cathode Material for Lithium-Ion Battery by a Novel Two-Step Method

CaF2-coated Li1.2Mn0.54Ni 0.13Co0.13O2as cathode materials for Li-ionbatteries

Carbon-Coated Sio(2) Nanoparticles As Anode Material for Lithium Ion Batteries