Abstract:In this article, the original Li1.2Mn0.54Ni0.13Co0.13O2 lithium-rich manganese-based cathode material with a uniform distribution of polygonal prisms was synthesized by a simple and reproducible sol-gel method, followed by a simple chemical deposition method. The structure and electrochemical performance of the original and modified cathode materials were characterized by XRD, XPS, EDS, SEM, TEM, and constant current charge/discharge tests. The results showed that LaF3 was uniformly coated on the surface of the original material and the thickness of the 2 wt% coating layer was about 2-3 nm. With this coating amount, the cathode material could obtain the best cycling and rate performance. The first coulomb efficiency of the modified material was 73%, which was 7% higher than that of the original material. Secondly, the cycling performance was improved. When the coated material was cycled at 0.2 C for 50 cycles, the discharge capacity was 325mAh∙g-1, and the capacity retention rate was 99.21%, while the original material was only 78.73%. Finally, the performance was also improved at high current density. The coated material could still reach 170mAh∙g-1 at 5C, which was 70% higher than the original material. The significant improvement in electrochemical performance was attributed to the fact that the LaF3 coating layer made the material avoid direct contact with the electrolyte which could reduce the occurrence of side reactions and increase the stability of the material. Besides, expanded layer space resulted from lattice expansion after coating could broaden the transmission channel of lithium ions and facilitate the insertion-extraction of lithium ions during charge and discharge.

CaF2-coated Li1.2Mn0.54Ni 0.13Co0.13O2as cathode materials for Li-ionbatteries

coated Li 1 . 2 Mn 0 . 54 Ni 0 . 13 Co 0 . 13 O 2 as cathode materials for Li-ion atteries

Structure and electrochemical performance of CaF 2 coated LiMn 1/3 Ni 1/3 Co 1/3 O 2 cathode material for Li-ion batteries

Contents Lists Available at ScienceDirect

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Enhanced electrochemical performance of Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 cathode material coated with Li + -conductive Li 2 SiO 3 for lithium ion batteries

A cation/anion co-doped Li1.12Na0.08Ni0.2Mn0.6O1.95F0.05 cathode for lithium ion batteries

Improved Electrochemical Performance of LaF3-coated Layered Oxide Li1.2Mn0.54Ni0.13Co0.13O2 Cathode Material for Lithium- Ion Batteries Prepared by Sol-Gel Method

Li[Li0.20Ni0.128Co0.136Mn0.536]O2 Cathode Material for Lithium-Ion Batteries

Surface Phase Transformation and CaF2 Coating for Enhanced Electrochemical Performance of Li-rich Mn-based Cathodes

Electrochemical performance of SrF2-coated LiNi1/3Co1/3Mn1/3O2 cathode materials for Li-ion batteries

Improving rate capacity and cycling performance of lithium-rich high-Mn Li-1.8[Mn0.7Co0.15Ni0.15]O-2.675 cathode materials by Li2SiO3 coating

Effect of carbon coating on electrochemical performance of Li 1.048 Mn 0.381 Ni 0.286 Co 0.286 O 2 cathode material for lithium-ion batteries

Synthesis, Characterization and Electrochemical Performance of Li[Li0.2Mn0.54Ni0.13Co0.13]O2cathode Materials for Lithium-Ion Batteries

Enhanced Electrochemical Property of FePO4-coated LiNi0.5Mn1.5O4 As Cathode Materials for Li-ion Battery

Electrochemical Performance of SrF2-coated LiMn2O4 Cathode Material for Li-ion Batteries

Enhanced Electrochemical Performance And Thermal Stability Of A Cepo4-Coated Li1.2ni0.13co0.13mn0.54o2 Cathode Material For Lithium-Ion Batteries

Optimized Ni-rich LiNi0.83Co0.06Mn0.06Al0.05O2 cathode material with a Li1.3Al0.3Ti1.7(PO4)3 fast ion conductor coating for Lithium-ion batteries

The combined effect of CaF2 coating and La-doping on electrochemical performance of layered lithium-rich cathode material

Improved Electrochemical Performances of Li- and Mn-Rich Layered Oxides 0.4li4/3mn2/3o2·0.6lini1/3co1/3mn1/3o2 Cathode Material by Co3O4 Coating

Enhanced Electrochemical Performance of Perovskite LaNiO3 Coating on Li1.2Mn0.54Ni0.13Co0.13O2 As Cathode Materials for Li-ion Batteries