Abstract:An in situ synthesis method for carbon-coated LiFePO4 powders has been investigated in detail using inexpensive FePO4 as an iron source and polypropylene as a reductive agent and carbon source. Thermogravimetric and differential thermal analysis of the precursor mixture indicated that the pyrolysis of polypropylene and the combination reaction of LiFePO4 could be processed synchronously at a synthesis temperature between 500 and 800 degrees C. X-ray diffraction analyses and scanning electron microscopy observations showed that LiFePO4/C composites with fine particle sizes and homogeneous carbon coating could be directly synthesized by the in situ method. The electrochemical performances of the carbon-coated LiFePO4 powder synthesized at 700 degrees C were evaluated using an electrochemical model cell by galvanostatic charge/discharge and cyclic voltammetry measurements. The in situ synthesized LiFePO4/C composite had a high electrochemical capacity of 164 mA h g(-1) at the 0.1C rate, and possessed a favorable capacity cycling maintenance at the 0.3 and 0.5C rates. The good electrochemical properties of the LiFePO4/C composite are suggested to originate from the good crystallinity, the fine particle sizes, and the efficient electronic conductive coating layer of the material. (c) 2005 The Electrochemical Society.

In-situ generation of Li 2 FeSiO 4 /C nanocomposite as cathode material for lithium ion battery

Scalable Synthesis of Fe3O4/C Composites with Enhanced Electrochemical Performance As Anode Materials for Lithium-Ion Batteries

In Situ Synthesis of Carbon Doped Porous Silicon Nanocomposites As High-Performance Anodes for Lithium-Ion Batteries.

A facile synthesis of FePS 3 @C nanocomposites and their enhanced performance in lithium-ion batteries.

In-situ generated nano-Fe 3 C embedded into nitrogen-doped carbon for high performance anode in lithium ion battery

Mesoporous Li2 FeSiO4/C as Cathode Material for Lithium Ion Battery

Fe3O4/C Composites Synthesized from Fe-based Xerogels for Anode Materials of Li-ion Batteries

In-Situ Preparation Of Si@C Composite Anode Materials For Lithium Ion Batteries

Inorganic-based Sol–gel Synthesis of Nano-Structured LiFePO 4 /C Composite Materials for Lithium Ion Batteries

Preparation and properties of LiFePO4/C composite materials with Fe2O3 as starting reactant

Synthesis of LiFePO4/C Composite As a Cathode Material for Lithium-Ion Battery by a Novel Two-Step Method

Synthesis And Electrochemical Properties Of Li2fesio4/C As Cathode Materials For Lithium-Ion Batteries

Multifunctional carbon-confined FeS nanoparticles for a self-supporting and high-capacity cathode in lithium ion battery

Hydrothermal Synthesis and Electrochemical Performance of Nanoparticle Li2FeSiO4/C Cathode Materials for Lithium Ion Batteries

Synthesis and structural stability of Li 2.1 Mn 0.9 [PO 4 ] 0.1 [SiO 4 ] 0.9 /C mixed polyanion cathode material for Li-ion battery

Synthesis and electrochemical characterization of LiFePO4/C Cathode materials for Li-ion batteries

Chemical Vapor Deposition Prepared Bi-Morphological Carbon-Coated Fe3o4 Composites As Anode Materials for Lithium-Ion Batteries

In Situ Synthesis and Properties of Carbon-Coated Lifepo4 As Li-Ion Battery Cathodes

Electrodeposited Carbon@fe2o3 Composites As Binder-Free Anodes for Lithium Ion Batteries

Li 0.99 Ti 0.01 FePO 4 /C composite as cathode material for lithium ion battery

Li<sub>0.99</sub>Ti<sub>0.01</sub>FePO<sub>4</sub>/C composite as cathode material for lithium ion battery