Abstract:Benzoxazine resin has been paid more attention in the fields of aviation, electronics, automobiles and new energy industries because of its excellent comprehensive performance. Further application is limited, however, by shortcomings such as high brittleness and high curing temperature. Furthermore, higher thermal stability is imperiously demanded in special areas. Incorporating both an acetylene group and silicon into the benzoxazine monomer is a promising possible solution to improve the curing processability, thermal properties and toughness of benzoxazine. In this paper, an acetylene-functional/silicon-containing benzoxazine monomer was prepared by two-step synthesis, and acetylene-functional benzoxazine was also prepared as a comparison. FTIR and 1H NMR confirmed the molecular structure of acetylene-functional/silicon-containing benzoxazine. Differential scanning calorimetry (DSC) analysis showed that the initial and peak degradation temperatures of acetylene-functional/silicon-containing benzoxazine were decreased by 21 °C and 18 °C compared with acetylene-functional benzoxazine, respectively. The apparent activation energy of the curing reaction of acetylene-functional/silicon-containing benzoxazine was 83.1 kJ/mol, which was slightly lower than acetylene-functional benzoxazine (84.7 kJ/mol). TGA results showed that the acetylene-functional/silicon-containing benzoxazine had a higher thermal stability than acetylene-functional benzoxazine. The temperatures of 5% weight loss of acetylene-functional/silicon-containing benzoxazine were 380 °C in nitrogen and 485 °C in air, and the char yield at 1000 °C was 80% in nitrogen and 21% in air, respectively. The results of mechanical properties showed that the impact strength of acetylene-functional/silicon-containing benzoxazine was higher than acetylene-functional benzoxazine by 35.4%. The tensile and flexural strengths of acetylene-functional/silicon-containing benzoxazine were slightly higher than that of acetylene-functional benzoxazine.

Preparation and properties of silicon-containing arylacetylene resin/benzoxazines blends

Application and Properties of Silicon-containing Arylacetylene Resin and Benzoxazine with Functional Groups Blend

Preparation and Properties of Polybenzoxazine Blends and Their Glass Fabric-Reinforced Composites

A Branched Silicon-Containing Arylacetylene Resin

Preparation and properties of silicon-containing benzoxazine with high thermal stability

Synthesis and Characterization of Poly(arylacetylene)Resins Containing Methylsilylene Groups

Properties of Silicon-Containing Arylacetylene Resin Modified by Tri(3-acetylenephenylamino)phenylsilane

Synthesis of Silicon-containing Arylacetylene Resin Catalyzed by Zinc Powder

Synthesis and thermal properties of silicon-containing benzoxazine

Preparation and Properties of Low Viscosity Silicon-containing Arylacetylene Resin

Thermal stability of blends of polysilane and silicon-containing arylacetylene resin

Synthesis and properties of silicon‐containing arylacetylene resins with polyhedral oligomeric silsesquioxane

Synthesis and Characterization of Silicon-Containing Arylacetylene Ether of Bisphenol a Resins and Their Composites

Synthesis and characterization of block copolymers of poly(silane arylacetylene) and poly(siloxane arylacetylene)

Preparation of Alkynyls Terminated POSS and Its Modification of Poly(silicane arylacetylene) Resin

Synthesis and Properties of Arylacetylene Resins with Siloxane Units

Properties of benzoxazines and their blending resins synthesized by microwave solid-phase method

Preparation and Characterization of Cyano-Silicon-Containing Arylacetylene Resins and Their Composites: Dual Enhancement Strategy Involving Physical Interfacial Interactions and Chemical Crosslinking

Thermal and Oxidation Behavior of Boron-Silicon-Containing Arylacetylene Polymer

A Novel Acetylene-Functional/Silicon-Containing Benzoxazine Resin: Preparation, Curing Kinetics and Thermal Properties

Preparation and Characterization of High Char Yield Polybenzoxazine/polyarylacetylene Blends for Resin‐transfer Molding